Manual Shark ION Robot RV700 N Series (page 7 of 13) (English)

743744

Zoom out

Zoom in

1/13

sharkclean.comsharkclean.com

USING THE SHARK ION™ ROBOT

BotBoundary strips

Cut the BotBoundary strip to the desired length

(18˝/45cm minimum) so that it spans the length

of the doorway or object you want to block o.

Identify areas or objects you want the robot to avoid.

To keep your robot away from certain areas, such as pet bowls, fragile objects, power strips,

or doorways, use the BotBoundary strips to quickly and easily create “no-go zones”.

NOTE: To prevent bumping, place strips at least 2 inches in front of the object you want to block o.

For best results, make sure your BotBoundary strip

is completely ﬂat against the ﬂoor. Make a closed

loop around an object, or place the strips between

ﬁxed objects, like door frames or the legs of a couch,

to create no-go zones.

BotBoundary™ strips

4-inch

Min.

Generally, BotBoundary strips are not needed

on stairs because your robot's cli sensors will

prevent it from falling o ledges. For your robot’s

cli sensors to work properly,

all runners, rugs, or carpets must be at least

4 inches from any stairs (or extend over the edge

of the stairs.)

If a runner, rug, or carpet edge is less than

4 inches from the stairs and can’t be moved,

use a BotBoundary strip to block o the stairs.

MAINTENANCE

EMPTYING THE DUST BIN

Press the Dust Bin Release Button and slide out

the dust bin.

CAUTION: Turn o power before performing any maintenance.

To open the dust bin lid, press and hold the button

while lifting the lid, using the ﬁnger slots.

Empty debris and dust into trash.

EMPTY DUST BIN AFTER EACH USE.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark ION Robot RV700 N Series in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark ION Robot RV700 N Series Manual

Product: