743231
8
Zoom out
Zoom in
Previous page
1/11
Next page
sharkclean.comsharkclean.com
MAINTAINING YOUR VACUUM
TROUBLE SHOOTING
WARNING: To reduce the risk of shock and unintended operation, turn o
power and remove the ION Power Pack before servicing.
Vacuum is not picking up debris, no suction or light suction.
(Refer to Maintenance section for more information.)
Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the
filters before reinserting in the vacuum.
Dust cup may be full; empty dust cup.
Check floor nozzle for blockages; clear blockages if required.
Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
Check connection between handvac and wand for blockages; clear blockages if required. If the issue
persists, please contact Customer Service.
Vacuum lifts area rugs.
Check that vacuum is in ION POWER mode. Take care when vacuuming area rugs or rugs with delicately
sewn edges.
Turn o the unit to disengage the brushroll and restart with the Power button.
Brushroll/Soft Roller does not spin.
If Brushroll Indicator Light on the floor nozzle turns red, the brushroll has stopped spinning. Immediately
turn o and remove ION Power Pack from handheld vacuum and remove any blockages before
reconnecting and turning vacuum back on. If light turns green, the blockage has been successfully
cleared. If any blockages remains red, please contact Customer Service.
If headlights are not illuminated, there is a connection issue between the handheld vacuum, wand, and
nozzle. Try disconnecting and reattaching the pieces. If the headlights still do not illuminate, please
contact Customer Service.
Vacuum turns o on its own.
There are several possible reasons for the vacuum turning o on its own, including blockages, ION Power
Pack issues, and overheating. If vacuum turns o on its own, perform the following steps:
1. Check LED lights on ION Power Pack to see if it needs to be recharged. If power pack does not need
charging, turn o vacuum and remove power pack.
2. Empty dust cup and clean filters (see Maintenance section).
3. Check wand, accessories, and inlet openings and remove any blockages.
4. Allow unit and ION Power Pack to cool for at least 45 minutes, until it returns to room temperature.
5. Return power pack to vacuum and press Power button.
Note: If vacuum still does not operate properly, contact Customer Service.
LED lights on ION Power Pack are flashing.
Bottom LED light is flashing (Fig. A): ION Power Pack needs to be charged.
Top and bottom LED lights are flashing (Fig. B): ION Power Pack temperature is not optimal, so charging
is temporarily paused. Leave power pack plugged in and charging will resume soon.
If top 2 or bottom 2 LED lights are flashing (Fig. C, Fig. D), call Customer Service.
Fig. A Fig. B Fig. C Fig. D
LIGHT INDICATOR WHAT IT MEANS
FLOOR and CARPET icons alternate
illuminating
Unit temperature is high. Turn o
vacuum. While unit is cooling, look
for blockages and remove any that
are found. Filters may also need to
be cleaned.
ION POWER and ION BOOST icons
are flashing together
Blockage detected. Turn o unit and
remove blockage.
Headlights are flashing
Debris caught in the brushroll. Turn
o the vacuum, then remove debris.
Garage door lid may not be properly
closed Turn o the vacuum, and
ensure the lid is properly clicked in on
both sides.
MAINTAINING YOUR VACUUM
TROUBLE SHOOTING
For all other issues, please call Customer Service at 1-800-798-7398.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark IF280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark IF280 in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info