743229
20
Zoom out
Zoom in
Previous page
1/24
Next page
19 0800 862 0453
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn o
power and remove power pack before servicing.
Vacuum is not picking up debris, no suction or light suction.
(Refer to Maintenance section for more information.)
Check filters to see if they need cleaning. Follow instructions for rinsing and completely
air-drying the filters before reinserting in the vacuum.
Dust cup may be full; empty dust cup.
Check floor nozzle for blockages; clear blockages if required.
Remove any string, carpet fibres, or hair that may be wrapped around the brushroll and Soft Roller
or trapped behind the Soft Roller.
Check connection between handvac and wand for blockages; clear blockages if required. If the
issue persists, please contact Customer Service at 0800 862 0453
Vacuum lifts rugs.
Check that vacuum is in EXTENDED RUNTIME mode. Take care when vacuuming rugs with
delicately sewn edges.
Turn off the unit to disengage the brushroll and restart with the Power button.
Brushroll/Soft Roller does not spin.
If Brushroll Indicator Light on the floor nozzle turns red, the brushroll and/or Soft Roller have
stopped spinning. Immediately turn off and remove Lithium ION Power Pack from handheld vacuum
and remove blockage before reconnecting and turning vacuum back on. If light turns green, the
blockage has been successfully cleared. If it remains red, please contact Customer Service at 0800
862 0453.
If headlights are not illuminated, there is a connection issue between the handheld vacuum, wand,
and nozzle. Try disconnecting and reattaching the pieces. If the headlights still do not illuminate,
please contact Customer Service at 0800 862 0453.
Vacuum turns o on its own.
There are several possible reasons for the vacuum turning off on its own, including blockages, Lithium
ION Power Pack issues, and overheating. If vacuum turns off on its own, perform the following steps:
1. Check LED lights on Lithium ION Power Pack to see if it needs to be recharged. If power pack
does not need charging, turn off vacuum and remove power pack.
2. Empty dust cup and clean filters (see Maintenance section).
3. Check wand, accessories, and inlet openings and remove any blockages.
4. Allow unit and Lithium ION Power Pack to cool for at least 45 minutes, until it returns to room
temperature.
5. Return power pack to vacuum and press Power button.
Note: If vacuum still does not operate properly, contact Customer Service at 0800 862 0453.
LED lights on ION Power Pack are flashing.
If top 2 or bottom 2 LED lights are flashing (Fig. A, Fig. B), call Customer Service at
0800 862 0453.
Bottom LED light is flashing (Fig. C): Lithium ION Power Pack needs to be charged.
Top and bottom LED lights are flashing (Fig. D): Lithium ION Power Pack temperature is not optimal,
so charging is temporarily paused. Leave power pack plugged in and charging will resume soon.
Fig. A Fig. B Fig. C Fig. D
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark IF200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark IF200 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Shark IF200

Shark IF200 User Manual - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info