Manual Shark AI Robot VacMop RV2000WD (page 10 of 39) (English, French, Spanish)

743714

Zoom out

Zoom in

1/39

sharkclean.comsharkclean.com

CLEANING SENSORS AND CHARGING CONTACTS

CLEANING SIDE BRUSHES

MAINTENANCE

Carefully unwind and remove any string or hair

wrapped around brushes.

Gently wipe brushes with a dry cloth. To reinstall,

snap the brushes over the pegs. Spin the brushes

manually to make sure they are installed correctly.

CLEAN SENSORS AND CHARGING CONTACTS AS NEEDED. With a dry cloth, gently dust o the sensors

and contacts located on the bottom of the robot and on the dock.

NOTE: Remove and replace any side brushes that are bent or damaged. To remove a brush, lift it o its peg.

IMPORTANT: The robot uses cli sensors to avoid stairs and other steep drops. Sensors may work less eectively when

they are dirty. For best results, clean sensors regularly.

CLEAN SIDE BRUSHES AS NEEDED.

CLEANING THE WHEELS

MAINTENANCE

CLEAN FRONT WHEEL PERIODICALLY.

See sharkaccessories.com for replacement parts.

Clean the wheel housing.

Periodically clean the drive wheels and the housing

around them. To clean, rotate each drive wheel

while dusting.

NOTE: Brush not included.

Since every room in my house has baseboards, how/where am I supposed to set up the dock? Submitted on 7-1-2022 at 15:55
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark AI Robot VacMop RV2000WD in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 11,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark AI Robot VacMop RV2000WD Manual

Product: