489201
11
Zoom out
Zoom in
Previous page
1/21
Next page
10
Open/Close TFT Monitor
Press the ( ) button on the front zone remote control or press the ( ) button on the front panel
to open/close the monitor.
TFT Monitor Auto Open
·If “TFT Auto Open” is “On”, when the unit is turned on, the monitor automatically opens to the
last viewing position.
·If “TFT Auto Open” is ”Off” , when the unit is turned on, press the (
) button on the remote
control or press the ( ) button on the front panel to open the monitor into the desired viewing
position.
·If “TFT Auto Open” is ”Manual”when the unit is turned on or turned off, the monitor has no
movement.
See “General setting” for more instructions.
Monitor Tilt Angle Adjustment
The monitor angle can be adjusted for optimum viewing using one of the following methods:
• Press the (
) button on the front panel to adjust the tilt angle of the screen one step at a time.
• Press and hold the (
) button to continuously adjust the tilt angle.
• Adjust the “Screen Tilt” in the “Screen setting” to adjust the tilt of the screen to the desired
degree.
Rear Camera Mode
When the vehicle is placed in "Reverse", and an optional rear camera is connected to the unit,
the TFT monitor will automatically switch to the camera input source.
Image Setting
Video Output Format
The table below shows the video output format for each source.
Video Output Format
Playing Source Video Output Format
FM/AM Tuner RGB Mode
DVD RGB Mode
AUX IN CVBS Mode
CAMERA CVBS Mode
iPod(video) CVBS Mode
*CVBS-- Composite Video Base band Signal
Adjustable Parameters
While in RGB mode, the only parameter that can be adjusted is brightness (BRIGHT). To access
“PICTURE”,“COLOR”, “CONTRAST”, and “TINT” you must be in CVBS mode.
Parameter Adjustment Procedure
1. Enter Picture Quality Setting mode:
Press the PIC button on the remote or press and hold the PIC button on the unit.
2. Select Item to Set:
Press the (
/ ) buttons on the remote or press the ( / ) buttons on the front panel to
select an item.
3. Set Parameters:
Press the (
/ ) buttons on the remote or rotate the SMART DIAL clockwise/counterclockwise to
adjust the selected feature to the desired setting.
4. Exit Picture Quality Setting Mode:
Press the PIC button on the remote or press and hold the PIC button on the unit.
NOTE: There must be a video signal present on the AUX or CAMERA input to adjust the above
settings.
TFT Monito
r
O
p
eration
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sevic Blue Laser SBL0401MP4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sevic Blue Laser SBL0401MP4 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sevic Blue Laser SBL0401MP4

Sevic Blue Laser SBL0401MP4 Additional guide - English - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info