489199

Sevic Blue Laser SBL0304MP4 Manual

11
Zoom out
Zoom in
Previous page
1/38
Next page
10
Open/Close TFT Monitor
Press the ( ) button on the front panel or on the remote control to open/close the TFT monitor.
TFT Monitor Auto Open
·If “TFT Auto Open” is “ On”, when the unit is turned on, the monitor automatically moves to the last
viewing position.
·If “TFT Auto Open” is ”Off”, when the unit is turned on, press the ( ) button on the front panel or on
the remote control to move the monitor into the desired viewing position.
·If “TFT Auto Open” is ”Manual”， when the unit is turned on or turned off, the monitor is no any
movement.
See “General setting” for more instructions.
Monitor Tilt Angle Adjustment
The monitor angle can be adjusted for optimum viewing using one of the following methods:
• Press the ( ) or ( ) buttons on the front of the unit to adjust the tilt angle of the screen one step at a
time.
• Press and hold the ( ) or ( ) buttons to continuously adjust the tilt angle.
Rear Camera Mode
When the vehicle is placed in "Reverse", and an optional re ar camera is connected to the unit, the TFT
monitor will automatically switch to the camera input source.
Image Setting
Video Output Format
The nether table shows the video output format for each playing source.
Video Output Format
Playing Source
Video Output Format
FM/AM Tuner
RGB Mode
DVD
RGB Mode
AUX IN
CVBS Mode
CAMERA
CVBS Mode
*CVBS-- Composite Video Base band Signal
Adjustable Parameters
While in RGB mode, the only parameter that can be adjusted is brightness (BRIGHT). To access
“PICTURE”,“COLOR”, “CONTRAST”, and “ BRIGHT you must be in CVBS mode.
Parameter Adjustment Procedure
1. Enter Picture Quality Setting mode:
Press the PIC button on the remote or press and hold the INFO button on the unit.
2. Select Item to Set:
Press the / buttons on the remote or rotate the ENTER button clockwise/anticlockwise to select a
item.
3. Set Parameters:
Press the / buttons on the remote or press the ANGLE button ( / ) on the front panel to
adjust the selected feature to the desired setting.
4. Exit Picture Quality Setting Mode:
Press the PIC button on the remote or press and hold the INFO button on the unit.
Using the TFT Monitor
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sevic Blue Laser SBL0304MP4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sevic Blue Laser SBL0304MP4 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info