Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Familiarisation
1. Feeder opening stopper
2. Blender jug
3. Blade
4. Feeder opening
5. Lid
6. Blender mounting
7. Drive shaft coupling
Important safety instructions
● The blender attachment must only be
used with food processor model
KM3882. Therefore, the KM3882 safety
instructions also apply.
● Caution: the blade is extremely sharp. To
prevent injuries, take special care when
cleaning the appliance.
● Do not touch any moving parts during
operation - this can be extremely
dangerous.
● Caution: when the blender is in use, the
attachment mounting on the main unit
will also rotate.
● Always switch the appliance off and
remove the plug from the wall socket,
- before opening the lid,
- before removing or fitting the blender
jug,
- in case of any malfunction during use,
- before cleaning,
- after use.
● Children are not aware of the dangers
that may occur when operating electrical
appliances. Therefore keep such
appliances away from children.
● Always replace the cover on the blender
mounting when not in use.
● This appliance is intended for domestic
use only and not for commercial
applications.
Before using for the first time
Before the appliance is used for the first
time, the blender jug and the lid should be
thoroughly cleaned as described in the
section General care and cleaning.
Operation
-
Fit the blender jug to the food processor,
ensuring that the recesses in the drive
shaft coupling and blender mounting are
correctly aligned. Turn clockwise to lock
it.
-
Put the liquid ingredients into the
blender jug. The jug has a maximum
capacity of 1250 ml. To avoid possible
foaming or spilling when processing
foamable or thin liquids such as milk, do
not fill the jug over the 1000 ml mark.
-
Attach the lid. To add ingredients during
operation, the stopper in the centre of the
lid can be removed by turning it in an
anti-clockwise direction and then lifting
it. Do not insert any objects into the
blender jug while the appliance is
operating.
-
Insert the plug into the wall outlet and
use the control switch to select the
required power setting. Depending on
the food to be processed, the appliance
may also be operated for short periods of
time in the pulse setting “P”. Do not
operate the appliance when the blender
jug is empty.
-
After using the blender, switch the
appliance off and remove the plug from
the wall socket. Wait until the motor has
come to a complete standstill before
removing the blender jug.
Ice crusher
This blender may also be used to crush ice.
Put the ice cubes into the jug, but do not fill
over the 750 ml mark, and switch the
appliance on. Once the ice cubes are crushed
to the desired size, switch the appliance off
and take out the ice.
3
Blender attachment
