712974
13
Zoom out
Zoom in
Previous page
1/76
Next page
13
Thermal safety cut-out
The pre-set thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating plate
is calci ed. Once the safety cut-out has
switched off the kettle, it must be allowed to
cool down suf ciently, or must be descaled
before it is switched on again.
Before using for the rst time
To clean the kettle, boil and discard the rst
lling of water.
Boiling water
Remove the water container from its
base.
Press the lid-opener on the handle to
open the lid, and ll the container with
water to the desired level, observing the
Min (0.5 l) and Max (1.0 l) markings.
Close the lid and place the container
back on its base.
Insert the plug into a suitable wall socket
and press the On/Off switch; the indicator
light comes on.
The boiling process begins. After
reaching the boiling point, the appliance
is automatically switched off by the
integral steam cut-off device; the
indicator light goes out.
To interrupt the boiling process, set the
On/Off switch to its Off position.
To pour hot water, remove the container
from its base.
To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.
Remove the plug from the wall outlet
after use (the red indicator light goes
out).
Do not leave any residual water in the
container.
Using the tea infusers
Open the infuser and put in the desired
amount of tea; then close it and put it in
the cup.
Pour hot water over the infuser.
Caution: Do not put infusers in the
container while water is being boiled.
Caution: The infusers become hot
during use and will remain so for some
time afterwards.
Power cord wind-up storage
The wind-up power cord storage under the
base facilitates limiting the length of the
power cord during use and makes it easy to
store the appliance.
Descaling
Depending on the water quality in your
area, lime deposits may build up on the
heating element. It is advisable to remove
any such deposits at regular intervals.
Any warranty claim will be null and
void if the appliance malfunctions
because of insuf cient descaling.
A mixture of 0.5 litres of water and 40 ml
of vinegar essence is suitable.
Pour the descaler in.
Switch the appliance on and let the
solution reach boiling point.
Leave it to take effect for a short period.
To clean the container after descaling,
rinse thoroughly with clean water
.
During descaling, ensure suf cient
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin WK 9477 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin WK 9477 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info