654728
11
Zoom out
Zoom in
Previous page
1/68
Next page
11
excessive force has been used to pull the
power cord, it must no longer be used:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
The appliance must be used only on a
heat-resistant, level surface.
Do not operate the appliance below a
hanging cupboard or similar object; there
is a risk that escaping steam may be
trapped underneath.
Do not allow the appliance or its power
cord to come into contact with open
ames or any hot surfaces such as
hot-plates.
Do not let the power cord hang free, and
keep the cord well away from hot parts of
the housing.
Always remove the plug from the wall
socket,
- in case of any malfunction,
- after use,
- during cleaning.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Thermal safety cut-out
The preset thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating element
is calci ed. Once the safety cut-out has
switched off the kettle, it must be allowed to
cool down suf ciently, or must be descaled
before it is switched on again.
Keep-warm function
Once the boiling process is nished, the
water may be kept hot for another 30
minutes by pressing the HOLD TEMP button
before or after the heating process. However,
the keep-warm function is automatically
cancelled if the water container is removed
from the base for more than 30 minutes,
The indicator light on the HOLD TEMP
button is on while this function is active.
Before using for the rst time
To clean the kettle, boil and discard the rst
lling of water.
Boiling water
Remove the water container from its base.
Push the release button to open the lid,
and ll the container with water to the
desired level, observing the Max. marking.
Close the lid and replace the container
on its base. Insert the plug into a suitable
wall socket.
Once the appliance is connected to the
mains, the indicator lights on the operating
buttons will ash three times.
Select the desired temperature and press
the START/CANCEL button to turn the
appliance on. During the heating period,
the temperature can be changed at any
time.
The heating process begins.
The indicator light on the START/
CANCEL button comes on and that on
the temperature selection button starts
ashing.
After reaching boiling point (or the selected
temperature), the appliance switches off
automatically. The corresponding button
shows a steady light.
Around 30 seconds after the appliance
has switched off, the indicator lights on
the temperature selection and START/
CANCEL buttons will also go out.
As long as the kettle is connected to the
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin WK 3460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin WK 3460 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info