794457
11
Zoom out
Zoom in
Previous page
1/68
Next page
11
142 x 208 mm
Keep both the cord and the appliance
itself well away from heat sources (eg
hot-plates, gas ames)
.
Intended use
The appliance must only be used for
heating clean, fresh water and for
making hot beverages.
Warning! Any other use not stated in
the instructions (misuse) is considered
as not intended and can cause severe
personal injury or damage to the
appliance.
This appliance is intended for
domestic or similar applications, such
as
- in staff kitchens in shops, ofces and
other similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc.
and similar accommodation,
- in bed-and breakfast type
environments.
Do not leave the appliance unattended
while connected.
In case of a defective appliance
A defective appliance can cause
material damage and injury
:
Check the appliance for damage
before every use. Do not operate if the
appliance shows any sign of damage.
In the event that you detect damage,
please contact our customer service
department by phone or email (see
appendix).
Repairs to this appliance or its power
cord must only be carried out by our
customer service.
Overview and parts included
1. Identication plate (underside of base)
2. Base with cable storage
3. Power cord with plug
4. Spout with limescale lter
5. Handle
6. Removable lid
7. Water container with water level indicator
Item no. 3454:
8. On/off switch with indicator light
Item no. 3459:
8. On/Off switch
9. Light ring
Thermal safety cut-out
The pre-set thermal safety cut-out protects the heating
element from overheating should the appliance be
erroneously switched on without any water, or if the heating
plate is calcied. If the safety cut-out has been activated,
the appliance cannot be switched on again. In such a case,
the appliance must be allowed to cool down, or must be
descaled, before it is switched on again.
Before using for the rst time
Unpack the appliance completely and remove all
packaging materials.
For hygienic reasons, throw away the rst boiled lling of
the new kettle.
Boiling process
Take the water container off the base and remove the
lid.
Fill the water container with the desired amount of water.
Observe the Min (0.5 l) and Max markings (1.7 l) for
lling.
Put the lid on.
Place the container back on its base.
Plug in the mains power plug and turn on the kettle
using the on/off switch.
Item no. 3454: The indicator light stays on as long as the
appliance is switched on.
Item no. 3459: The light ring stays on as long as the
appliance is switched on.
The boiling process starts and the automatic steam stop
turns the kettle off automatically after it reaches boiling
point.
The process can be cancelled at any time by pressing
the On/Off switch.
To pour hot water, remove the container from its base.
The lid must be kept closed when pouring hot water, so
that hot steam does not come out. Caution! Hot steam
can rise upwards during pouring!
Remove the plug from the wall outlet after use.
Do not leave any residual water in the container.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin WK 3459 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin WK 3459 in the language / languages: All languages as an attachment in your email.

The manual is 1.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info