Manual Severin WK 3418 (page 12 of 72) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

761751

Zoom out

Zoom in

1/72

142 x 208 mm

Intended use

∙ The appliance must only be used for

heating clean, fresh water.

∙ Any use other than that described in

these instructions (misuse) must be

considered improper and may lead to

personal injury or material damage.

∙ This appliance is intended for

domestic or similar applications, such

- in staff kitchens in shops, ofces and

other similar working environments,

- in agricultural working environments,

- by customers in hotels, motels etc.

and similar accommodation,

- in bed-and breakfast type

environments.

∙ Do not leave the appliance unattended

while connected.

In case of a defective appliance

A defective appliance can cause

material damage and injury

∙ Check the appliance for damage

before every use. Do not operate if the

appliance shows any sign of damage.

∙ In the event that you detect damage,

please contact our customer service

department by phone or email (see

appendix).

∙ Repairs to this appliance or its power

cord must only be carried out by our

customer service.

Overview and parts included

1. Lid

2. Lid opener

3. Control panel

4. Water container

5. Handle

6. Power cord with plug

7. Base

8. Rating label (on underside)

Control panel

9. Temperature button

10. On/Off button

11. Selector button Keeping-warm / Heating-up

12. Display

Before using for the rst time

∙ Unpack the appliance completely and remove all

packaging materials.

∙ To clean the kettle, boil and discard the rst lling of

water.

Thermal safety cut-out

The pre-set thermal safety cut-out protects the heating

element from overheating should the appliance be

erroneously switched on without any water, or if the heating

plate is calcied. If the safety cut-out has been activated,

the appliance cannot be switched on again. In such a case,

the appliance must be allowed to cool down, or must be

descaled, before it is switched on again.

Temperature selection

The temperature can be selected using the Temperature

button on the

∙ The current water temperature in the container

(≥ 20 °C) is shown on the display.

∙ Pressing the Temperature button repeatedly

increases the temperature selection in 5-degree steps.

∙ If the current temperature inside the container exceeds

the temperature selected, the appliance cannot be

started; in this case, a sequence of three beep signals

is heard.

∙ Temperatures below 40 °C cannot be selected.

Automatic switch-off

Unless the keep-warm function has been selected, the

display will switch off automatically around 3 minutes after

the last operation.

In the keep-warm mode, the kettle switches off after around

30 minutes.

Operation

∙ Remove the water container from its base and press the

lid opener to open the lid.

∙ Fill the container with water to the desired level,

observing the Min (0.5 l) and Max (1.7 l) markings.

∙ Close the lid and place the container back on its base.

∙ Insert the plug into a suitable wall socket.

∙ A beep signal is heard and the display shows C,

followed by the current water temperature inside the

container. The appliance is now in Stand-by mode.

∙ Use the Temperature button to set the desired

temperature.

∙ Conrm by pressing the On/Off button . The water

level indicator lights up blue. The display shows

the selected temperature, followed by the current

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin WK 3418 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin WK 3418 Manual

Product: