ermal safety cut-out
e preset thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating element is
calci ed. Once the safety cut-out has switched
o the kettle, it must be allowed to cool down
su ciently, or must be descaled before it is
switched on again.
Temperature control
e temperature control is used to select
the desired water level. Once it is reached,
the kettle will automatically switch o . e
temperature is in nitely adjustable. To bring
water to boiling point, the temperature
control should be set at its maximum.
N.B: e setting increases as the control
is turned clockwise, and decreases as the
control is turned anti-clockwise.
Before using for the rst time
To clean the kettle, boil and discard the rst z
lling of water.
Boiling water
Never remove the water container from the z
base (or replace it) while the appliance is
switched on.
Remove the water container from its base. –
Open the lid and ll the container with –
water to the desired level, observing the
Min. and Max. markings.
Before closing the lid and placing the –
container back on its base, ensure that the
appliance has not yet been switched on.
Insert the plug into a suitable wall socket, –
turn the temperature control to the desired
setting and press the On/O switch. e
indicator light comes on.
e heating process begins. Once boiling –
point or the pre-set temperature has been
reached, the appliance automatically
switches o and the indicator light goes
out.
To stop the boiling process earlier, simply –
put the On/O switch to its O position.
To pour hot water, remove the container –
from its base.
To prevent hot steam from being emitted, –
ensure that the lid remains closed while
pouring out the water.
Remove the plug from the wall outlet a er –
use (the red indicator light goes out).
Do not leave any residual water in the –
container.
Power cord wind-up storage
e wind-up power cord storage under the
base facilitates limiting the length of the
power cord during use and makes it easy to
store the appliance.
Descaling
Depending on the water quality in your
area, lime deposits may build up on the
heating element. It is advisable to remove
any such deposits at regular intervals. Any
warranty claim will be null and void if the
kettle malfunctions because of insu cient
descaling. A mixture of 0.5 litres of water to
two tablespoons of vinegar essence is suitable.
Pour the descaler in. –
Switch the appliance
– on and let the
solution reach boiling point.
Leave it to take e ect for a short period. –
To clean the container a er descaling, –
rinse thoroughly with clean water.
Do not pour descalers down enamel- z
coated sinks.
General cleaning and care
Before cleaning the appliance, ensure it is z
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock, do not z
clean the kettle and the base with water
and do not immerse them in water. Do
not clean under running water.
For cleaning, a slightly damp, lint-free z
cloth may be used.
Do not use abrasives or harsh cleaning z
solutions, and do not use hard brushes for
cleaning.
8
