blades are very sharp. When handling the
blades, always hold them by their upper
protective plastic covering.
-
Place the lid into the processing bowl,
ensuring that the blade unit shaft fits
through the opening in the lid.
-
Fit the drive unit to the bowl.
-
Insert the plug into the wall socket and
press the push switch in brief bursts until
the food being processed has reached the
required consistency.
-
Avoid overfilling the bowl: the maximum
fill marks must not be exceeded. Before
the bowl is filled, the food to be
processed should be cut into pieces of
about 1 cm.
-
Do not fill the bowl with hot liquid or
hard food stuff such as ice cubes,
nutmegs, hard grain, coffee beans, rice or
hard spice. Other food such as chocolate
or raw meat is also unsuitable for
processing.
-
After processing, always remove the plug
from the wall socket before detaching the
drive unit and removing the lid. The
blade unit must be removed before the
processed food can be taken out of the
bowl.
-
When processing further food after the
first cycle, make sure that the receptacle
for the blade unit at the bottom of the
bowl is free of food residue before
refitting the unit.
Recipes
Food Amount Preparation Time
Salami 130g cubes, 1 x 1 x 1 cm in size 2 x 5 sec.
Dried fruit 130g 2 x 8 sec.
Cheese (Gouda, young) 120g cubes, 1 x 1 x 1 cm in size 3 x 6 sec.
Carrots 100g 1 cm thick slices 3 x 5 sec.
General Care and Cleaning
● Always remove the plug from the wall
socket before cleaning the appliance.
● To avoid the risk of electric shock, do not
clean the drive unit or the power cord
with water and do not immerse them in
water. The drive unit may be wiped with
a slightly damp lint-free cloth.
● Do not use abrasives or harsh cleaning
solutions for cleaning.
● Caution: the edges of the cutting blades
are extremely sharp.
-
The bowl and the lid can be cleaned
using hot water and a mild detergent.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of
two years from the date of purchase. Under
this guarantee the manufacturer undertakes
to repair or replace any parts found to be
defective, providing the product is returned
to one of our authorised service centres. This
guarantee is only valid if the appliance has
been used in accordance with the
instructions, and provided that it has not
been modified, repaired or interfered with
by any unauthorised person, or damaged
through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as glass
and ceramic items, bulbs etc. If the product
fails to operate and needs to be returned,
pack it carefully, enclosing your name and
address and the reason for return. If within
5
