712932
10
Zoom out
Zoom in
Previous page
1/56
Next page
10
Operation
Fit the cutting blade unit into the bowl
before lling the bowl with the food to be
processed. Exercise extreme caution: the
blades are very sharp. When handling the
blades, always hold them by their upper
protective plastic covering.
Place the lid into the processing bowl,
ensuring that the blade unit shaft ts
through the opening in the lid.
Fit the drive unit to the bowl.
Insert the plug into the wall socket and
press the push switch in brief bursts until
the food being processed has reached the
required consistency.
Avoid over lling the bowl: the maximum
ll marks must not be exceeded. Before
the bowl is lled, the food to be processed
should be cut into pieces of about 1 cm.
After processing, always remove the plug
from the wall socket before detaching
the drive unit and removing the lid. The
blade unit must be removed before the
processed food can be taken out of the
bowl.
When processing further food after the
rst cycle, make sure that the receptacle
for the blade unit at the bottom of the bowl
is free of food residue before re tting the
unit.
Recipes
Food Amount Preparation Time
Salami 130 g cubes, 1 x 1 x 1 cm in size 2 x 5 sec
Dried fruit 130 g 2 x 8 sec
Cheese (Gouda, young) 120 g cubes, 1 x 1 x 1 cm in size 3 x 6 sec
Carrots 100 g 1 cm thick slices 3 x 5 sec
Cleaning and care
Always remove the plug from the wall
socket before cleaning the appliance.
To avoid the risk of electric shock, do not
clean the drive unit or the power cord with
liquids and do not immerse them. The
drive unit may be wiped with a slightly
damp lint-free cloth.
Do not use abrasives or harsh cleaning
solutions for cleaning.
Caution: The edges of the cutting blades
are extremely sharp.
The bowl and the lid can be cleaned using
hot water and a mild detergent.
Disposal
Devices marked with this symbol
must be disposed of separately
from your household waste, as
they contain valuable materials
which can be recycled. Proper disposal
protects the environment and human health.
Your local authority or retailer can provide
information on the matter.
Guarantee
This product is guaranteed against defects
in materials and workmanship for a period
of two years from the date of purchase.
Under this guarantee the manufacturer
undertakes to repair or replace any parts
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin UZ 3860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin UZ 3860 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info