602739
11
Zoom out
Zoom in
Previous page
1/60
Next page
11
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Before using for the rst time
Clean the appliance (see General care
and cleaning) and completely remove any
packing materials.
Before using the appliance for the rst
time, let it heat up for 15 minutes with
both heating elements (
) on (see
Operation). When the appliance is
switched on for the rst time, a slight
smell may be emitted. This is normal and
will only last for a very short time. Ensure
suf cient ventilation.
4-position switch
Off
Upper heat
Lower heat
Upper and lower heat
Turn the 4-position switch to the desired
setting.
The heating elements will only switch on
after the timer is activated.
Timer
The timer can be used for selecting a certain
cooking time (max 60 minutes).
To turn the unit off, turn the switch to position
0.
To pre-programme the cooking time, turn the
switch clockwise to the desired time.
To set a time of less than 10 minutes, turn the
timer to a somewhat higher setting rst and
then slowly turn it back to the desired time
setting. After the pre-programmed time has
elapsed, an acoustic signal indicates that the
heating elements are switched off.
Indicator lamp
The indicator lamp lights up when the
appliance is switched on with the timer. It
goes out once the pre-programmed time has
elapsed, or if the switch is turned back to
position 0.
Interior compartment temperature
The interior operating temperature is around
200 °C.
Operation
Pre-heat the oven compartment for
several minutes with the door closed,
using the 4-position switch to set the
required temperature, and the timer to set
the desired pre-heating time.
Place the food to be cooked onto the
rack. When cooking food containing fat
or moisture, use the tray to stop any drips
into the interior of the appliance.
Close the glass door and use the timer to
choose the desired cooking time.
After the pre-programmed cooking time
has elapsed, the timer will automatically
switch off the heating elements.
To interrupt the cooking process, set the
timer switch to 0.
When opening the hot glass door after
operation, always use the handle. To
remove the baking tray, always use a
suitable oven-cloth Always place the tray
on a heat-resistant surface.
After use, set the 4-position switch to the
’ position and remove the plug from
the wall socket.
General care and cleaning
Before cleaning the appliance, ensure it is
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin TO 2054 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin TO 2054 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info