602736
12
Zoom out
Zoom in
Previous page
1/68
Next page
12
The switch settings (upper heat/lower
heat) may be changed during the cooking
process.
To interrupt the cooking process
temporarily, set the 7-position switch to
the ‘ ’ position.
Always use the door handle to open
the hot door after use. When removing
the baking tray or rack, use the handle
provided. Always place the tray and rack
down on a heat-resistant surface.
After use, set the 7-position switch to the
’ position and remove the plug from
the wall socket.
Using the hot-plates
Always place a pot / saucepan on the
hot-plate rst.
Large hot-plate:
Set the 7-position switch to the required
temperature.
Small hot-plate:
Set the temperature control to the
required temperature.
With one or both hot-plates switched on,
the indicator lamp is lit.
Ensure that the pot is clean and dry on
the outside. Do not use stain covered or
sooty pots / saucepans.
To prevent damage to the hot-plate, only
use pots / saucepans with at bottoms.
Most suitable are pots speci cally
designed for use on electric plates (see
picture I).
Always make sure that the pot / saucepan
used is of at least the same diameter
as the plate; this minimises the loss of
heat and prevents the plate from being
damaged as a result of uneven heat
distribution.
After use, set the 7-position switch to the
’ position (or the temperature control
to ‘0’) and remove the plug from the wall
socket.
Cleaning and care
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has completely cooled down.
To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
Do not use abrasives, harsh cleaning
solutions or spray-type oven cleaners.
The exterior housing and the door may be
cleaned with a damp, lint-free cloth.
The baking tray and rack may be cleaned
using hot water and a mild detergent.
After use, a wet cloth may be used to
remove any spills from the plates.
Following a longer period of use, a special
commercially available cleaning agent
should be used to treat the plates.
Changing the bulb inside the oven
compartment
The bulb is located in the right-hand side
panel behind a glass plate.
Allow the appliance to cool down.
Remove the glass plate by turning it anti-
clockwise.
Remove the defective bulb from its socket
by turning it anti-clockwise.
Fit a new15V bulb (socket-type E14) into
the socket by turning it clockwise.
Replace the glass plate and secure it by
turning clockwise.
Disposal
Devices marked with this symbol must be
disposed of separately from your household
waste, as they contain valuable materials
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin TO 2044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin TO 2044 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info