Manual Severin SM 9688 (page 11 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

556548

Zoom out

Zoom in

1/64

∙ No responsibility is accepted if damage

results from improper use, or if these

instructions are not complied with.

Before using for the ﬁ rst time

Remove any packaging materials and check

that all components are present.

Before the appliance is used for the ﬁ rst

time, or after extended periods of non-use, it

should be thoroughly cleaned as described

in the section Cleaning and care.

Operation

We recommend the use of long-life milk

(UHT) with a high protein content. For best

results, the milk should be taken from the

refrigerator immediately before frothing.

The underside of the container and the contact

area on the inside of the base must be clean

and dry.

Choosing the stirring head

∙ Use the smooth stirring head to heat up

milk.

∙ For frothing and heating milk at the same

time, use the serrated head.

∙ For cold-frothing milk, also use the

serrated head.

∙ The head not currently in use can be

stored in the rear of the housing.

Fill amounts

∙ Always observe the minimum mark and

ensure the container is ﬁ lled with at least

120 ml milk.

∙ For frothing, ﬁ ll the container to a

maximum of 350 ml (lower max mark

∙ For heating, ﬁ ll the container to a

maximum of 700 ml (upper max mark ).

Heating up or frothing milk

∙ Place the container onto the base.

∙ Remove the lid from the milk container.

∙ Place the appropriate head onto the

mounting protrusion inside the bottom of

the container.

∙ Put the required amount of milk into the

container.

∙ Place the lid on the container.

∙ Use the temperature control to set the

desired temperature or to select the cold-

frothing function (COLD).

∙ Insert the plug into a suitable wall socket.

A beep signal is heard and the main

indicator lamp starts ﬂ ashing.

∙ Press the On/Off switch.

∙ A double beep is heard, the indicator lamp

remains on and the motor cooling system

starts up.

∙ The stirring process begins. Once the

milk is sufﬁ ciently hot or the cold-frothing

process is complete, both heating and

stirring processes stop automatically.

∙ The main indicator lamp ﬂ ashes, and a

number of beep signals are heard.

∙ You can now remove the milk container

from the base. Use a suitable spoon to

take off the milk froth.

∙ The cooling system continues to run for

a brief period. The main indicator lamp

stops ﬂ ashing after about three minutes.

∙ The power cord can now be disconnected

from the socket.

Remarks

If the appliance has not been disconnected

from the mains , the On/Off switch must be

pressed twice to start a new operating cycle.

After a heating cycle, the appliance

cannot start a new stirring and heating

cycle immediately, but must be allowed to

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin SM 9688 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin SM 9688 Manual

Product: