712900
14
Zoom out
Zoom in
Previous page
1/80
Next page
14
Remark
Always allow the appliance to cool down
rst, before starting a new cycle.
Do not leave heated or frothed milk in the
container - pour it right away.
Hint
To achieve a thicker froth, go through a cold-
frothing cycle rst, followed by a hot-frothing
cycle.
Making hot cocoa
The appliance is also suitable for the
preparation of cocoa drinks.
Proceed as described in ‘Heating up milk
(having rst tted the insert without the
coil).
Turn the appliance on, take off the lid
after about 30 seconds, slowly put in the
desired amount of cocoa powder and
replace the lid.
To prevent the mechanism from
becoming blocked, only milk-soluble
cocoa powder should be used.
Interrupting or ending a cycle
Press the On/Off switch repeatedly until the
indicator light goes out. The heating and
stirring process stops.
Press the On/Off switch again to continue
the heating and stirring process.
Cleaning and care
Always remove the plug from the wall
socket and wait until the motor has come
to a complete standstill before cleaning
the appliance.
To avoid the risk of electric shock, do not
clean the base or the power cord with
water and do not immerse them.
The stirring inserts, holder and lid should
be cleaned after each operating cycle in
hot water and a little detergent.
The rubber ring on the holder can be
removed for cleaning in hot soapy water.
Dry thoroughly, and re t it to the holder
before the next cycle.
The milk container must not be immersed
in water or cleaned in a dishwasher. Fill
in some hot water and detergent and
wipe it clean.
Wipe all parts thoroughly dry.
Do not use abrasives or harsh cleaning
solutions.
Disposal
Devices marked with this symbol
must be disposed of separately
from your household waste, as
they contain valuable materials
which can be recycled. Proper disposal
protects the environment and human health.
Your local authority or retailer can provide
information on the matter.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin SM 9681 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin SM 9681 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info