Manual Severin SM 9495 (page 10 of 60) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

602864

Zoom out

Zoom in

1/60

Before using for the ﬁ rst time

Remove any packaging materials and check

that all components are present.

Before the appliance is used for the ﬁ rst

time, or after extended periods of non-use, it

should be thoroughly cleaned as described

in the section Cleaning and care.

Storing accessories

The stirring and heating accessories may be

stored in the lid. First, put the smooth collar

in with its opening facing up, and then ﬁ t the

serrated head inside.

Operation

We recommend using milk with a high

protein content. For best results, the

milk should be taken from the refrigerator

immediately before frothing.

The underside of the container and the contact

area on the inside of the base must be clean

and dry.

Choosing the stirring head

∙ For frothing and heating milk at the same

time, use the serrated head.

∙ For simply heating milk, put the serrated

stirring head in the collar, making sure

they are ﬁ tted inside the container with the

collar facing down.

Fill amounts

∙ Always observe the minimum mark and

ensure the container is ﬁ lled with at least

60 ml milk.

∙ For frothing, ﬁ ll the container to a

maximum of 120 ml (lower max mark

∙ For heating, ﬁ ll the container to a

maximum of 180 ml (upper max mark

Heating or frothing milk

∙ Place the container onto the base.

∙ Remove the lid from the milk container.

∙ Place the appropriate head onto the

mounting protrusion inside the bottom of

the container.

∙ Put the required amount of milk into the

container.

∙ Place the lid on the container.

∙ Insert the plug into a suitable wall socket.

Press the On/Off switch.

∙ There is then a beep-signal, and the

motor can be heard starting up.

∙ The appliance begins to heat up and stir

the milk.

∙ Once the milk is sufﬁ ciently hot, the

stirring and heating processes stop

automatically, and a number of beep-

signals are heard.

∙ You can now remove the milk container

from the base.

∙ Pour out the hot milk, or use a suitable

spoon to take off the milk froth.

∙ The cooling system continues to run for a

brief period. Remove the power cord from

the socket only when it has stopped. .

Remarks

Always allow the appliance to cool down

ﬁ rst, before starting a new cycle.

Making hot cocoa

The appliance is also suitable for the

preparation of cocoa beverages. Proceed

as described in ‘Heating up or frothing milk’

(having ﬁ tted the stirring insert and collar)

and turn the appliance on. Take off the lid

after about a minute, put in the desired

amount of cocoa powder and replace the lid.

To prevent the mechanism from becoming

blocked, do not use grated chocolate or

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin SM 9495 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin SM 9495 Manual

Product: