602877
13
Zoom out
Zoom in
Previous page
1/76
Next page
13
Replace the lid so that the spout is
completely covered.
The lid must be tted at all times
whenever the mixer is operated.
To add ingredients during operation, the
stopper in the centre of the lid can be
removed. Do not put any objects into
the blender jug while the appliance is
operating.
Insert the plug into the wall outlet and use
the rotary control to select the required
power setting.
Caution: Do not operate when the
blender jug is empty. Do not ll it with dry
items only, such as nuts, almonds etc.
After using the blender, switch off and
remove the plug from the wall socket.
Wait until the motor has come to a
complete standstill before removing the
blender jug.
Using the multi-mixer to crush ice
Ice-cubes can be easily crushed in the
blender jug:
Fill the jug a quarter full with ice cubes, and
then t it to the motor housing, as described
in the section Multi-mixer operation. Put on
the lid with the stopper in place, and use the
pulse function (P) to operate the appliance
for about 2 seconds. Wait until the ice cubes
have collected in the bottom of the jug again
and then repeat the process, until the cubes
have been reduced to the required size.
Grinding top operation
The grinding top is useful processing
spices, and for preparing pesto, dips and
purées.
Cut the food to be processed into small
pieces and then put it into the grinding
top.
Observe the maximum marking when
putting in the food. Do not over ll.
Caution: Do not operate the appliance
when it is empty.
Fit the blade unit in the grinding top and
turn it anti-clockwise all the way to lock it.
Turn the grinding top over and t it to
the motor housing so that the two arrow
marks are aligned.
Then turn it clockwise until it is heard
locking into place.
Insert the plug into a suitable outlet and
use the rotary control to select the desired
speed setting or the pulse function (P).
Remove the plug from the wall socket
after grinding. Wait until the motor has
come to a complete standstill before
removing the grinding top and the blade
unit.
Wind-up power cord storage
The power cord can be wound up for storage
on the underside of the unit. Unwind it
completely before operation.
Cleaning and care
Always remove the plug from the wall
socket before cleaning the appliance.
To avoid the risk of electric shock, do not
clean the motor housing or the power
cord with water and do not immerse them
in water. The motor housing may be
wiped with a slightly damp, lint-free cloth.
Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning.
Cleaning the blender jug:
To clean immediately after use,
ll the blender jug with around 700 ml
of warm water and a little detergent. Let
the appliance run for a short period as
described in the section Operation. Then
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin SM 3738 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin SM 3738 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info