602875
13
Zoom out
Zoom in
Previous page
1/72
Next page
13
Smoothie-maker operation
Cut the ingredients into cubes of about 15
mm and put them into the drink container
(see pic. A).
For best results, the following sequence
should be observed:
1. liquids
2. fresh ingredients
3. frozen ingredients
4. yoghurt/ice-cream
The container has a maximum capacity of
600 ml.
Screw the blade unit clockwise onto the
drink container.
Turn the container upside down and t it
to the motor housing in such a way that
the two triangle symbols are aligned. Now
lock the container by turning it clockwise.
Insert the plug into a suitable outlet and
use the rotary control to select the desired
speed setting or the pulse function (P).
Caution: Do not operate the appliance
when it is empty. Do not ll it with dry
items only, such as nuts, almonds etc.
If some residue sticks to the drink
container’s sidewalls, remove the
container, shake it and let it run through
another brief pulse cycle.
Remove the plug from the wall socket
after use. Wait until the motor has come
to a complete standstill before removing
the container and unscrewing the blade
unit.
Close the container with its lid.
Wind-up power cord storage
The power cord can be wound up for storage
on the underside of the unit. Unwind it
completely before operation.
Information for testing institutes:
The following recipe may be used:
Mix 400 g soaked carrots and 600 g water
for 3 minutes.
Cleaning and care
Always remove the plug from the wall
socket before cleaning the appliance.
To avoid the risk of electric shock, do not
clean the motor housing or the power
cord with water and do not immerse them
in water. The motor housing may be
wiped with a slightly damp, lint-free cloth.
Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning.
For cleaning directly after use, ll the
blender jug (max 700 ml) or drink
container (max 400 ml) with warm water
and a little detergent. Let the appliance
run for a short period as described in
the section Operation. Afterwards, rinse
the blender jug or drink container with its
blade unit, the lids and stopper with fresh
water. All parts must me thoroughly dried
afterwards.
The drink container and lids can also be
cleaned in a dishwasher. All other parts
are not dishwasher-safe.
If necessary, the sealing gasket on
the blender jug lid can be removed for
cleaning. Before the appliance is used
again, the gasket must be replaced.
If required, the blade unit for the blender
jar can be detached for cleaning: rst
remove the collar under the jar by turning
it clockwise (see pic. B), and lift out the
blade unit (pic. C). Caution: The blades
are extremely sharp. The gasket in the
drink container cannot be removed.
Clean the blade unit with a suitable brush.
Wipe the gasket with a moist cloth. To
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin SM 3737 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin SM 3737 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info