712885
7
Zoom out
Zoom in
Previous page
1/42
Next page
Dear Customer
Before using the appliance, the user must
read the following instructions carefully.
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1. Feeder opening stopper
2. Feeder opening
3. Lid
4. Blender jug
5. Blade
6. Motor housing
7. Main indicator light
8. Power cord with plug
9. Control switch
10. Rating label (on underside of
appliance)
11. Safety switch
12. Contact pin
13. Blender jug base lock
Important safety instructions
Before the appliance is used, the main
body as well as any attachments should
be checked thoroughly for any defects. If
the appliance, for instance, has been
dropped onto a hard surface, it must no
longer be used: even invisible damage
may have adverse effects on the
operational safety of the appliance.
Do not leave the appliance unattended
while in use and keep children away.
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Caution: Keep any packaging materials
well away from children, as they are a
potential source of danger e.g. from
suffocation.
Caution: the blade is extremely sharp. To
prevent injuries, take special care when
cleaning the appliance.
Do not touch any moving parts during
operation - this can be extremely
dangerous.
Do not allow the appliance or its power
cord to touch hot surfaces or to come
into contact with any heat sources.
Always switch the appliance off and
remove the plug from the wall socket,
- before opening the lid,
- before removing or fitting the blender
jug,
- before cleaning,
- in case of any malfunction during use,
- after use.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
This appliance is only intended for
domestic use and not for commercial
applications.
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
Before using for the first time
Before the appliance is used for the first
time, the blender jug and the lid should be
thoroughly cleaned as described in the
4
Blender
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin SM 3715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin SM 3715 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info