Manual Severin PG 8512 (page 15 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

713223

Zoom out

Zoom in

1/88

- before ﬁ lling the grill pan with water,

- after use,

- in case of any malfunction, and

- during cleaning.

∙ The use of an extension-lead reel causes

a loss of power, possibly combined with

a subsequent heat build-up in the cable.

It is therefore necessary to unwind the

cable completely if a cable reel is used.

Make sure that the reel is approved for

outdoor use by the manufacturer.

∙ Never move the grill while it is in use

or still hot. Always allow the appliance

sufﬁ cient time to cool down before

carrying, transporting or storing it. Pour

out any remaining water after use.

∙ Ensure that the grill is not stored

outdoors, or in any other location where

it might be subjected to extremes of

temperature or high humidity.

∙ No responsibility is accepted if damage

results from improper use, or if these

instructions are not complied with.

∙ This product complies with all binding CE

labelling directives.

Grill assembly

The barbecue grills are available in different

conﬁ gurations.

When assembling the grill, always refer to

diagram A corresponding to your particular

grill model. Follow the steps below:

∙ Place the grill pan inside the plastic

housing.

∙ Place the heating element into the grill

pan.

∙ Fit the grill rack on top.

For some grill models, we also offer an

additional base stand:

Assemble the base stand according to the

schematic diagram B. Place the grill onto

the stand in such a way that the small feet

under the grill connect in the top of the

vertical legs of the base stand; ensure that

the grill and base stand are placed in a safe

and stable position.

The power cord should be routed in such a

way that no one is likely to trip over it.

Heating element

The junction box contains a safety switch.

Place the grill pan into the plastic housing

ﬁ rst, and then ﬁ t the heating element inside

the grill pan and housing. The safety switch

is activated automatically when the heating

element has been properly ﬁ tted. If not ﬁ tted

correctly, the appliance cannot be switched

on.

Before using for the ﬁ rst time

∙ Remove any packaging materials and

stickers from the appliance.

∙ Clean the grill rack and grill pan with

warm soapy water; dry thoroughly

afterwards.

∙ Assemble the grill as described above.

∙ Fill the grill pan with water up to the ‘Max’

marking.

∙ Insert the plug into a suitable earthed

power-outlet.

∙ Let the grill heat up for approximately

5 minutes without any food on the

rack. This will lessen the smell typically

encountered when ﬁ rst switching on

a new grill (a slight smell and a little

smoke may be emitted - ensure sufﬁ cient

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin PG 8512 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin PG 8512 Manual

Product: