799268
14
Zoom out
Zoom in
Previous page
1/76
Next page
14
142 x 208 mm
Rotary control
The rotary control is used for function selection or switching
off (Sleep mode).
Turn:
Select the Function/Temperature/Timer.
Push - short:
Conrmtheselection.
Push - two seconds:
1 x: return to stand-by mode to change a function
2 x: return to sleep mode
Rotary control - light ring
The light ring indicates the current operating mode:
No light:
The unit is in sleep mode.
Blue light:
The unit is in stand-by mode.
Flashing:
The grill rack has not yet reached the selected temperature.
The unit is heating up or cooling down.
Steady:
The selected temperature has been reached.
Orange:
Grilling at 80-350 °C
Red:
Boost-zone 330-500 °C
Purple:
Indirect grilling at 80-200 °C
Timer
The timer is used to monitor the grilling time. It can be set
from 1 min to 23 h 59 mins. Beep signals indicate that the
running time has elapsed; the heating element remains
switched on.
Turn the rotary control until lights up.
Presstherotarycontrolbrieyandturntoselectthe
hours.
Presstherotarycontrolbrieyandadjusttheminutes.
Conrmthetimesettingbybrieypressingthecontrol.
Thecolonstartsashing;oncethetimehaselapsed,
beep signals are heard.
To return to stand-by mode, press the rotary control for
two seconds.
Alternatively, set the timer to 0:00, and press the control
brieytoreturntostand-bymode.
If the heating is switched off after the timer is set, the
appliance will change to sleep-mode 5 minutes after the
last input, i.e. the timer is switched off.
If the timer is set with the heating already off, it will
continue until the pre-selected time is reached, when the
unit changes to sleep-mode.
Grilling at 80-350°C
Togrillsausages,poultry,shetc.Fornishingorkeeping
warm steaks.
The entire grill surface is heated.
Turn the rotary control until lights up.
Presstherotarycontrolbrieyandturntoselectthe
desiredtemperature.Pressbrieytoconrm.
Theringstartsashingorangeandtheapplianceis
heating up.
Once the selected temperature has been reached, the
ring shows steady orange.
Place the food on the grill surface.
Close the cover, if desired.
‘Boost-zone’ grilling 330-500 °C
For searing or light grilling of steaks.
The boost-zone is located to the right; the left side is
heated to 330 °C.
Turn the rotary control until lights up.
Presstherotarycontrolbrieyandturntoselectthe
desiredtemperature.Pressbrieytoconrm.
Theringstartsashingredandtheapplianceisheating
up.
Once the selected temperature has been reached, the
ring shows steady red.
Place the food on the boost-zone.
Note:
Do not close the cover during Boost-zone grilling. The
Boost-zone function is automatically de-activated when
the cover is closed.
For subsequent cooking, lower the temperature or shift
the food to the left on the grill surface.
Indirect grilling at 80-200°C
For slow cooking, e.g. for roasts or for large steaks that
require additional cooking. This means that only the outer
area of the grilling surface is heated, creating an indirect
grilling zone.
Turn the control dial until lights up.
Pressthecontroldialbrieyandturnittosetthe
requiredtemperature.Conrmbypressingbriey.
Theringashespurpleandtheapplianceheatsup.
As soon as it reaches the selected temperature, the ring
lights up purple continuously.
Place the food on the grilling surface.
Now you can close the lid if you wish.
Grilling with the core thermometer
Scope of supply: 2 items
Other core thermometers are available under item no.
8126.
Caution: The core thermometers heat up during use.
Usesuitableprotection,egbarbecuegloves.
Fit the thermometer plugs into the sockets at the lower
left of the junction box . To prevent the appliance from
switching off, ensure that the box is not lifted up and
stays properly connected.
Select the desired grill function and temperature.
Once pre-heating is complete and the ring shows a
steady light, put on the food.
Push the tips of the thermometers into the centre of the
food.
Usetherotarycontroltosetthedesiredcore
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin PG 8140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin PG 8140 in the language / languages: All languages as an attachment in your email.

The manual is 2.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info