Manual Severin PG 8114 (page 12 of 64) (All languages)

799269

Zoom out

Zoom in

1/64

142 x 208 mm

Grilling 80-320 °C

Togrillsausages,poultry,shetc.Fornishingorkeeping

warm steaks.

The entire grill surface is heated.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

desiredtemperature.Pressbrieytoconrm.

∙Theringstartsashingorangeandtheapplianceis

heating up.

∙ Once the selected temperature has been reached, the

ring shows steady orange.

∙ Place the food on the grill surface.

‘Boost-zone’ grilling 330-500 °C

For searing or light grilling of steaks.

The boost-zone is located to the right; the left side is

heated to 320 °C.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

desiredtemperature.Pressbrieytoconrm.

∙Theringstartsashingredandtheapplianceisheating

up.

∙ Once the selected temperature has been reached, the

ring shows steady red.

∙ Place the food on the boost-zone.

∙ For subsequent cooking, lower the temperature or shift

the food to the left on the grill surface.

Grilling with the core thermometer

∙ Select the desired grill function and temperature.

∙ Once pre-heating is complete and the ring shows a

steady light, put on the food.

∙ Fit the thermometer plug into the socket at the lower

left of the junction box . To prevent the appliance

from switching off, ensure that the box stays properly

connected and does not move.

∙ Push the tip of the thermometer into the centre of the

food.

∙Usetherotarycontroltosetthedesiredcore

temperature.Pressbrieytoconrm.

∙ The display shows the current core temperature.

∙ Once the pre-set core temperature is reached, three

long beep signals are heard.

∙ Remove the thermometer and take off the food.

∙ Note:

The grill plate remains on even after the pre-set core

temperature has been reached.

Stand-by mode

∙ To switch off the heating and return to stand-by mode,

press the rotary control for two seconds.

∙Alternatively,pressthecontrolbriey,setthe

temperatureto00andpressagainbrieytoreturnto

stand-by mode.

Sleep mode

∙ If the heating is switched off, the appliance will change

to sleep-mode 5 minutes after the last input.

∙ To switch off earlier, press the rotary control for two

seconds.

After grilling

∙ Always disconnect the unit from the mains and allow it to

cool down after grilling.

Cleaning and care

∙ Ensure that the grill is thoroughly cleaned after use.

∙ Before cleaning the grill, ensure it is disconnected from

the power supply and has completely cooled down.

∙ Do not use metallic pads or abrasive cleaning agents.

∙ Remove the wind-guard and grill rack and clean them

in a dish-washer or with warm soapy water. To remove

persistent food residues, they can be left soaking for a

while.

∙ Remove the heating element. To avoid the risk of electric

shock, do not clean the heating element with water and

do not immerse it in water. The junction box may be

wiped with a slightly damp lint-free cloth.

∙Takeoffthereectortrayandcleanitinadish-washer

or with warm soapy water. To remove persistent food

residues, it can be left soaking for a while.

∙ The tip of the core thermometer may be wiped with a

moist cloth.

∙ All other parts can be cleaned with a cloth soaked

in soapy water, and should be wiped completely dry

afterwards.

Hint!

Tohelpcleanthewind-guard,grillrackandreectortray,

baking powder may be used. Mix a paste from water and

baking powder, rub the paste onto the affected areas

and let it take effect for a while. Clean with a soft brush/

sponge and rinse thoroughly afterwards.

Disposal

Devices marked with this symbol must be

disposed of separately from your household

waste, as they contain valuable materials which

can be recycled. Proper disposal protects the

environment and human health. Your local authority or

retailer can provide information on the matter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin PG 8114 in the language / languages: All languages as an attachment in your email.

The manual is 1.74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin PG 8114 Manual

Product: