Manual Severin PG 8107 (page 13 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

761778

Zoom out

Zoom in

1/68

142 x 208 mm

Timer

The timer is used to monitor the grilling time. It can be set

from 1 min to 23 h 59 mins. Beep signals indicate that the

running time has elapsed; the heating element remains

switched on.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

hours.

∙Presstherotarycontrolbrieyandadjusttheminutes.

∙Conrmthetimesettingbybrieypressingthecontrol.

Thecolonstartsashing;oncethetimehaselapsed,

beep signals are heard.

∙ To return to stand-by mode, press the rotary control for

two seconds.

∙ Alternatively, set the timer to 0:00, and press the control

brieytoreturntostand-bymode.

∙ If the heating is switched off after the timer is set, the

appliance will change to sleep-mode 5 minutes after the

last input, i.e. the timer is switched off.

∙ If the timer is set with the heating already off, it will

continue until the pre-selected time is reached, when the

unit changes to sleep-mode.

Grilling 80-320 °C

Togrillsausages,poultry,shetc.Fornishingorkeeping

warm steaks.

The entire grill surface is heated.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

desiredtemperature.Pressbrieytoconrm.

∙Theringstartsashingorangeandtheapplianceis

heating up.

∙ Once the selected temperature has been reached, the

ring shows steady orange.

∙ Place the food on the grill surface.

∙Close the cover, if desired.

‘Boost-zone’ grilling 330-500 °C

For searing or light grilling of steaks.

The boost-zone is located to the right; the left side is

heated to 320 °C.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

desiredtemperature.Pressbrieytoconrm.

∙Theringstartsashingredandtheapplianceisheating

up.

∙ Once the selected temperature has been reached, the

ring shows steady red.

∙ Place the food on the boost-zone.

Note:

Do not close the cover during Boost-zone grilling. The

Boost-zone function is automatically de-activated when

the cover is closed.

∙ For subsequent cooking, lower the temperature or shift

the food to the left on the grill surface.

Grilling with the core thermometer

∙Fit the thermometer plugs into the sockets at the lower

left of the junction box . To prevent the appliance from

switching off, ensure that the box is not lifted up and

stays properly connected.

∙ Select the desired grill function and temperature.

∙ Once pre-heating is complete and the ring shows a

steady light, put on the food.

∙ Push the tips of the thermometers into the centre of the

food.

∙Usetherotarycontroltosetthedesiredcore

temperature - (right socket) or (left socket). Press

brieytoconrm.

∙ The display shows the respective current core

temperature.

∙When using the cover during grilling, the core-

thermometer cables should be routed through the cable

leads on either side of the cover (see diagram 10).

∙ Once the pre-set core temperature on one thermometer

is reached, three long beep signals are heard.

∙ Remove the respective thermometer and take off the

food.

Note:

The grill plate remains on even after the pre-set core

temperature has been reached.

Stand-by mode

∙ To switch off the heating and return to stand-by mode,

press the rotary control for two seconds.

∙Alternatively,pressthecontrolbriey,setthe

temperature to 00andpressagainbrieytoreturnto

stand-by mode.

Sleep mode

∙ If the heating is switched off, the appliance will change

to sleep-mode 5 minutes after the last input.

∙ To switch off earlier, press the rotary control for two

seconds.

After grilling

∙ Always disconnect the unit from the mains and allow it to

cool down after grilling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin PG 8107 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin PG 8107 Manual

Product: