716492
13
Zoom out
Zoom in
Previous page
1/68
Next page
13
142 x 208 mm
Timer
The timer is used to monitor the grilling time. It can be set
from 1 min to 23 h 59 mins. Beep signals indicate that the
running time has elapsed; the heating element remains
switched on.
Turn the rotary control until
lights up.
Presstherotarycontrolbrieyandturntoselectthe
hours.
Presstherotarycontrolbrieyandadjusttheminutes.
Conrmthetimesettingbybrieypressingthecontrol.
Thecolonstartsashing;oncethetimehaselapsed,
beep signals are heard.
To return to stand-by mode, press the rotary control for
two seconds.
Alternatively, set the timer to 0:00, and press the control
brieytoreturntostand-bymode.
If the heating is switched off after the timer is set, the
appliance will change to sleep-mode 5 minutes after the
last input, i.e. the timer is switched off.
If the timer is set with the heating already off, it will
continue until the pre-selected time is reached, when the
unit changes to sleep-mode.
Grilling 80-320 °C
Togrillsausages,poultry,shetc.Fornishingorkeeping
warm steaks.
The entire grill surface is heated.
Turn the rotary control until lights up.
Presstherotarycontrolbrieyandturntoselectthe
desiredtemperature.Pressbrieytoconrm.
Theringstartsashingorangeandtheapplianceis
heating up.
Once the selected temperature has been reached, the
ring shows steady orange.
Place the food on the grill surface.
‘Boost-zone’ grilling 330-500 °C
For searing or light grilling of steaks.
The boost-zone is located to the right; the left side is
heated to 320 °C.
Turn the rotary control until lights up.
Presstherotarycontrolbrieyandturntoselectthe
desiredtemperature.Pressbrieytoconrm.
Theringstartsashingredandtheapplianceisheating
up.
Once the selected temperature has been reached, the
ring shows steady red.
Place the food on the boost-zone.
For subsequent cooking, lower the temperature or shift
the food to the left on the grill surface.
Grilling with the core thermometer
Fit the thermometer plugs into the sockets at the lower
left of the junction box . To prevent the appliance from
switching off, ensure that the box is not lifted up and
stays properly connected.
Select the desired grill function and temperature.
Once pre-heating is complete and the ring shows a
steady light, put on the food.
Push the tips of the thermometers into the centre of the
food.
Usetherotarycontroltosetthedesiredcore
temperature -
or .Pressbrieytoconrm.
The display shows the respective current core
temperature.
Once the pre-set core temperature on one thermometer
is reached, three long beep signals are heard.
Remove the respective thermometer and take off the
food.
Note:
The grill plate remains on even after the pre-set core
temperature has been reached.
Stand-by mode
To switch off the heating and return to stand-by mode,
press the rotary control for two seconds.
Alternatively,pressthecontrolbriey,setthe
temperature to 00andpressagainbrieytoreturnto
stand-by mode.
Sleep mode
If the heating is switched off, the appliance will change
to sleep-mode 5 minutes after the last input.
To switch off earlier, press the rotary control for two
seconds.
After grilling
Always disconnect the unit from the mains and allow it to
cool down after grilling.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin PG 8104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin PG 8104 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info