603031
13
Zoom out
Zoom in
Previous page
1/68
Next page
13
pan.
Fit the grill plate on top.
If required, additional accessories may be
tted according to the diagram.
Fill the grill pan with water up to the ‘Max’
marking.
Insert the plug into a suitable earthed
power-outlet.
Let the grill heat up for approximately
10 minutes without any food on the grill
plate. This will lessen the smell typically
encountered when rst switching on a
new grill (a slight smell and a little smoke
may be emitted).
Grilling
The grill pan must be lled with water up
to the ‘Max’ marking.
Fit the heating element; then ensure that
the grill plate is placed correctly onto the
element.
Insert the plug into a suitable earthed
power-outlet.
Turn the thermostat control knob
clockwise all the way. The indicator light
comes on, and the heating element is
permanently switched on.
After approximately 10 minutes, the heating
element reaches the right temperature for
grilling.
The grill can also be used to keep the
food warm: by turning the thermostat
control back, the intervals between the
heating element switching on and off can
be reduced to a minimum.
Caution: to prevent a possible build-
up of heat and subsequent damage to
the appliance, the food to be cooked
must be placed directly onto the grill
plate. Do not place any objects (e.g.
aluminium foil, barbecue plates or
other items) between the food and the
heating element.
As the water in the grill pan evaporates
during grilling, it must be topped up in
good time. When adding water, ensure
that the water does not come into contact
with the heating element. Caution:
disconnect the grill from the mains before
adding water. If your grill plate comes with
a ller opening, the water must be poured
through the opening.
Once the grilling process is nished:
Set the thermostat control knob back to
''.
Remove the plug from the power outlet
and allow the grill to cool down.
General care and cleaning
Ensure that the grill is thoroughly cleaned
after use.
Before cleaning the grill, ensure it is
disconnected from the power supply and
has completely cooled down.
Do not use metallic pads or abrasive
cleaning agents.
Remove the grill plate and clean it with
warm soapy water. To remove persistent
food residues, it can be left soaking for
a while.
The heating element can be removed
for cleaning. To avoid the risk of electric
shock, do not clean the heating element
with water and do not immerse it in water.
The junction box may be wiped with a
slightly damp lint-free cloth.
All other parts can be cleaned with a cloth
soaked in soapy water, and should be
wiped completely dry afterwards.
Disposal
Devices marked with this symbol must
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin PG 2794 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin PG 2794 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info