654703

Severin MW 7868 Manual

22
Zoom out
Zoom in
Previous page
1/132
Next page
22
A-7
soup
200 ml 200
400 ml 400
600 ml 600
A-8
cakes
475 g 475
A-9
pizza
200 g 200
300 g 300
400 g 400
A-10
chicken / poultry
500 g 500
750 g 750
1000 g 1000
1200 g 1200
Setting multiple programmes
The unit may be set for a maximum of 2 programmes running consecutively, e.g. defrosting, followed by microwave cooking. Any
defrosting, microwave, grill or hot-air programmes as well as the combination of the programmes may be selected. Any defrosting
programme must of course run before any cooking programme can be started.
Example: to defrost food before it is cooked using the microwave function.
1. Programme the defrost function (without pressing )
2. Programme the microwave function.
3. Pre ss
. The display shows the appropriate symbols for the selected programmes.
5 beeps indicate that the entire programme has fi nished.
Hint: This memory function is especially helpful when using the microwave to cook food at different power settings. While a higher
power setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that
the heat is evenly distributed when the food is already done.
Timer
The microwave can be pre-programmed in such a way that it starts operating at a pre-determined time. However, always check fi rst
that the time on the unit has been correctly set prior to using the timer delay function.
1. Set the time (see Setting the clock).
2. Set the desired programme. The unit allows you to set 2 programmes; however, none of the defrosting programmes can be
selected with the timer delay.
Note: Do not yet press after the current programme selection. Automatic cooking programmes can only be started individually.
3. Press
. The current time is displayed and the hour display fl ashes.
4. Use the rotary control to select the desired hour setting (between 0-23 resp. 1-12) at which you want the unit to start operating.
5. Press . The minute display fl ashes.
6. Use the rotary control to select the desired minute setting (between 0-59) at which you want the unit to start operating.
7. Press
. The selected programme will start at the pre-programmed time, when 2 acoustic signals will be heard.
Childproof safety device:
This safety device prevents children from operating the appliance without supervision.
To activate the safety device, press
for 3 seconds. The symbol
appears on the display.
To switch off the safety device, press again for 3 seconds. The symbol disappears.
Note: Should you experience a problem switching the appliance on, fi rst verify that the safety device is not activated.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin MW 7868 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin MW 7868 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info