Manual Severin MC 2448 (page 11 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

602878

Zoom out

Zoom in

1/68

Connecting the appliance

First connect the smaller plug to the socket on the rear right of

the appliance, and then insert the mains plug to a suitable wall

outlet. A signal is heard, and the possible programme options

and 12:00 are shown on the display.

Setting the current time

∙ Connect the appliance to the mains. Keep the HOUR/MIN

button pressed for three seconds, until the minute digits

start ﬂ ashing. Use the +/- buttons to set the correct minutes.

Press the HOUR/MIN button to set the hours. After a few

seconds, the ﬂ ashing of the hour/minute digits ceases; the

current time is now set.

∙ The appliance can also be used without ﬁ rst setting the

current time.

∙ In the case of a power failure, the time remains stored for

around 12 minutes.

Utensil holder

There is a snap-on hook for the utensil holder at the rear right

side of the appliance. Fit the holder (provided separately) from

above, ensuring that it locks into place. The serving spoon or

ladle may also be stored here during operation.

Lid

∙ To open the lid, pull the lid release downwards.

∙ When closing the lid, always ensure that it locks safely into

place.

Cooking insert markings

The cooking insert shows the following markings:

CUP: Water ﬁ ll amount per measuring cup of rice (see

Cooking programmes - Rice).

MAX: Maximum ﬁ ll level

L: Fill amount in litres

General operation

∙ Note: To prevent damage to the non-stick coating of the

cooking insert, do not use any sharp or pointed objects.

Use only the spoon or ladle supplied, or otherwise wooden

cooking utensils.

∙ Prepare the food according to the recipe.

∙ Place the cooking insert into the appliance.

∙ Connect the appliance to the mains and, if so desired, set

the current time.

∙ Put the water or food into the cooking insert, observing the

information provided for the individual cooking programmes.

When steam cooking, place the steaming insert into the

cooking insert.

∙ Note: Observe the Min and Max markings inside the

cooking insert.

∙ Close the lid, ensuring that it is safely closed and locked into

place.

∙ Select the desired cooking programme with the MENU

button. With each push of the button, the next programme in

the sequence is selected.

∙ If desired, the starting time for the cooking process can be

delayed (see Delayed timer setting).

∙ If desired, the pre-set programme running time can be

adjusted individually (see Individual programme running

time

). This function is not available in the rice-cooking and

fast-cooking programmes.

∙ Press the START button to start the programme.

∙ The selected cooking programme starts after a lead time of

approx. 60 seconds.

∙ The cooking programme can be interrupted at any time by

pressing the KEEP button.

∙ To cancel data input while programming, press the KEEP

button twice.

∙ The display shows the remaining cooking time (not

applicable for rice-cooking and fast-cooking programmes).

∙ An acoustic signal indicates that the cooking time has

elapsed, and the appliance switches to Keep warm mode.

∙ After the food has been taken out, turn the appliance off and

disconnect it from the mains.

Delayed timer setting (PRESET)

∙ With this programme function, the programme start can be

delayed for up to 24 hours.

∙ After selecting the desired cooking programme, press the

TIMER button.

∙ Use the +/- buttons to enter the required number of hours.

∙ Press the HOUR/MIN button and then use the +/- buttons to

enter the minutes.

∙ Press the TIMER button to conﬁ rm your input.

∙ Press the START button to start the programme.

∙ The display shows the current time and PRESET.

∙ While in this delay mode, the time selected can be displayed

by pressing the TIMER button.

∙ Once the pre-programmed delay has elapsed, the cooking

programme starts automatically.

Individual programme running time

∙ With this programme function, the pre-set cooking time can

be changed and adjusted individually.

∙ This function is not available in the rice-cooking and fast-

cooking programmes.

∙ After selecting the cooking programme, TIMING and the

pre-set time appear on the display. Press the

TIME button.

∙ First use the +/- buttons to enter the required number of

hours.

∙ Press the HOUR/MIN button and then use the +/- buttons to

enter the minutes.

∙ To enter the hours/minutes, press the +/- buttons repeatedly,

or keep them pressed.

∙ Now press the START button to begin the programme

sequence.

∙ The following programme running times can be selected:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin MC 2448 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin MC 2448 Manual

Product: