556507
27
Zoom out
Zoom in
Previous page
1/34
Next page
62
Version 3 2012-08
GB
8.3 Cleaning the brewing unit
In addition to an integrated cleaning program, the device also offers you the
opportunity to clean the brewing unit manually. For this, the brewing unit can
be removed as follows:
1. Switch the device off and disconnect the plug.
2. Remove the water tank and shake out the remaining water.
3. Open the door of the brewing unit on the back side of the device by
pressing down on the tabs with your thumbs and pulling towards you
(Fig. 14).
4. Remove the brewing unit door completely.
 The brewing unit is now visible.
5. Pull the red lever of the brewing unit upwards and pull the brewing unit
carefully downwards at an angle out of the machine (Fig. 15).
6. Clean the brewing unit under running water.
CAUTION!
Incorrect handling of the brewing unit can cause
damage to the brewing unit.
Do not take the brewing unit apart or adjust it.
Make sure that the locking lever of the brewing
unit is open when you insert it.
Push the brewing unit carefully in from bottom
to top.
7. Insert the brewing unit into the machine from behind and push it in as far
as it goes (Fig. 16).
8. Press the red lever of the brewing unit down. If the lever does not move,
check the position of the brewing unit again and re-insert it.
1.
2.
1.
2.
1.
2.
g. 14: Removing the cover of the brewing unit g. 15: Pulling out the brewing unit g. 16: Inserting the brewing unit
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KV 8023 - S2 plus ONE TOUCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KV 8023 - S2 plus ONE TOUCH in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Severin KV 8023 - S2 plus ONE TOUCH

Severin KV 8023 - S2 plus ONE TOUCH User Manual - English, German - 506 pages

Severin KV 8023 - S2 plus ONE TOUCH User Manual - German - 35 pages

Severin KV 8023 - S2 plus ONE TOUCH User Manual - Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish - 506 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info