360126

Severin ks 9893 Manual

16
Zoom out
Zoom in
Previous page
1/124
Next page
Warning: Always disconnect the unit from the mains before any maintenance or repair work is
carried out.
1. Remove the four screw covers (11) and the
screws (10).
2. Remove the top panel (9), and the cover plate
(8) from the front.
3. Remove the two screws (6) securing the upper
hinge plate (5) on the right-hand side.
4. Carefully lift up the door and place it on a
suitable surface to protect it from scratches.
5. Take off the white plug (7) and re-position it
in the corresponding hole on the right-hand
side, pushing it firmly down.
6. Remove the two screws (1) securing the lower
hinge plate (2) on the right-hand side.
7. Take out the adjustable foot (4) and
re-position it on the right-hand side.
8. Mount the lower hinge plate (2) using both screws (1) in its new position on the left. Ensure that
the plate is aligned parallel to the side edge of the unit. (Do not fully tighten the screws yet.)
9. Replace the door in its new position. Ensure that the hinge pin of the lower hinge plate is inserted
into the guide bushing (hole) in the door.
10. Mount the upper hinge plate (5) using both screws (6) in its new position on the left. Ensure that
the hinge pin is inserted into the guide bushing (hole) in the door. (Do not fully tighten the
screws yet.)
11. Close the door and ensure that it is properly aligned before fully tightening the screws of the
upper and lower hinge plates.
12. Fit the top panel (9) on the unit and – with the door open – replace the cover plate (8) into the
opening on the right-hand side of the front.
13. Replace the screws (10) and screw covers (11) on the top panel (9).
14. Put the unit back in its intended position and wait for about two hours before connecting it to
the mains.
Temperature control
The unit is activated by connecting it to the mains. It is only switched off
completely when the plug is removed from the wall socket.
The temperature in the refrigerator cabinet can be adjusted by setting the
temperature control. Turning the control clockwise will decrease the
temperature, while turning it anti-clockwise will increase it.
– After switching on, the temperature control should be set to its highest setting.
– After approx. 30 minutes, the temperature should be changed to a medium setting, which is
usually sufficient for home or office use. Following a power interruption, or if the unit has been
switched off on purpose, it may take 3 to 5 minutes before it switches on again.
Note: In position ‘0’, the cooling function is switched off, though the appliance is still connected
to the mains.
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin ks 9893 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin ks 9893 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info