Manual Severin KS 9877 (page 15 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712730

Zoom out

Zoom in

1/112

wide enough for the drawers to be taken out.

Set-up dimensions

Ventilation

The heated air around the rear of the unit must be able to

circulate freely. Therefore, ensure that the air circulation behind

the unit is not obstructed.

Caution: Ensure at all times that the rear ventilation

openings around the top cover are not obstructed.

Reversible door

If required, the door may be reversed, i.e. from right-hinged (default

installation) to left-hinged.

Warning: Always disconnect the unit from the mains before

any maintenance or repair work is carried out.

Before you get started, please note the following:

∙ Always ensure that the correct number of washers is used

on the hinge bolts.

∙ So that the doors can close tightly against the frame, take

the utmost care that they are properly aligned during re-

assembly.

1. Remove the four covers c from the housing and inside of

the door.

2. Unscrew the hinge bolt on the inside of the door in the

area c/6.

Caution: Support the door.

3. Take off the refrigerator door.

4. Take out the ﬁ xing screws and remove the upper bracket

6. Note the small plastic plate underneath the bracket.

5. Turn the bracket 6 including the small plastic plate through

180° and replace it on the other side of the refrigerator,

using the two screw holes adjacent to each other.

6. Remove the hinge support 5 from the underside of the

door and ﬁ t the hinge support provided on the opposite

side.

7. Take out the covering caps and then remove the hinge

support in the middle 4.

Caution: Support the door.

8. Take off the freezer door 3.

9. Remove the lower panel 1.

10. Take out the ﬁ xing screws and remove the bracket 2 with

its hinge bolt.

11. Unscrew the hinge bolt, together with the washers, from

the bracket, and ﬁ t it into the corresponding opening on

the opposite side of the bracket.

12. Remove the bracket 7 and replace it with the holding

bracket 2 with its hinge bolt.

13. Now install the holding bracket 7 in the previous position

of the bracket 2.

14. Take out the sealing plugs 8 from the partition separating

the refrigeration and freezer compartments and replace

them in the openings on the opposite side.

15. Take out sealing plug 9 from the freezer door and replace

it in the opening on the opposite side.

16. Place the freezer door onto the hinge bolt on holding

bracket 2.

Caution: Support the door.

17. Turn the holding bracket 4 with its hinge bolt through 180°,

ensuring that the washers remain in place.

18. Replace the bracket on the opposite side on the freezer

door and secure it with the screws.

19. Replace the covering caps over the screw heads.

20. Place the refrigerator door onto the hinge bolt on holding

bracket 4.

Caution: Support the door.

21. Re-insert the hinge bolt of the bracket 6 into the

refrigerator door.

22. Fit the four covers c over the bracket and the openings.

23.

Remove the screw covering caps a and the sealing plugs

24. Take out the screws holding the door handles. Move the

handle slightly towards the side with the screw and then

pull the handle off to the front.

25. Fit the handles on the opposite side, using the ﬁ xing

screws to secure them. Push the sealing plugs into the

now empty openings in the door and replace the covering

caps on the screw heads.

26. Take out the cover 10 from the lower panel 1 and replace

it on the opposite side.

27. Replace the panel 1 on the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9877 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KS 9877 Manual

Product: