Manual Severin KS 9835 (page 16 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

556634

Zoom out

Zoom in

1/100

– For frequent cleaning we recommend the use of warm water with some mild detergent. To

prevent any unpleasant odour within the refrigerator, it should be cleaned about once a month.

– Any accessories should be cleaned separately with soapy water. Do not put them in a dishwasher.

– Do not use abrasives or harsh cleaning solutions or any cleaning agents that contain alcohol.

– After cleaning, thoroughly clean all surfaces with fresh water before wiping them completely dry.

When re-inserting the plug into the wall socket ensure that you have dry hands.

– To save energy and to ensure optimum performance, the condenser (at the rear) as well as the

compressor should be cleaned at least twice a year with a broom or a vacuum cleaner.

– Take care not to remove or damage the rating plate inside the cabinet during cleaning.

Trouble-shooting

Certain typical sounds can be heard when the appliance is switched on. These sounds are:

– caused by the electrical motor within the compressor assembly;

during compressor start-up the sound level will be slightly higher

for a limited period of time.

– caused by the cooling agent flowing through the circuit.

The following table lists possible malfunctions and their probable caus es and solutions. In the event

of operational problems, check first whether a solution can be found using this table. If the problem

persists, disconnect the appliance from the mains power and contact our Customer Service

Department.

Problem Possible cause and solution

The appliance is not working at all.

– There is a power failure

– The main fuse has blown.

– The temperature control is set to ‘0'.

– The fuse in the wall socket (if applicable) has blown. This

can be checked by connecting another electrical device

to the socket and checking for function.

The normal operating sound

changes or becomes louder.

– Check for proper positioning (uneven floor?).

– Are any adjacent objects affected by the running of the

cooling unit (i.e. causing them to vibrate?)

– Are there any objects on top of the unit which might be

vibrating?

Water is collecting on the bottom

of the unit.

The melt-water drain system is blocked. Remove the

blockage and clean the system.

Transporting the appliance

The unit must only be transported in its vertical position.

Do not tilt it any more than 45°. To ensure optimum performance, wait a minimum of 2 hours after

transporting the unit before connecting it to the mains.

During transport, ensure that the unit is properly secured and protected against shock, vibration and

shifting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9835 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KS 9835 Manual

Product: