Manual Severin KS 9816 (page 13 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712710

Zoom out

Zoom in

1/96

Familiarisation

1. Temperature control

2. Door

3. Frozen-food drawer (top)

4. Frozen-food drawer (middle)

5. Frozen-food drawer (bottom)

6. Adjustable feet

Before using for the ﬁ rst time

∙ Remove any exterior and interior packaging materials

completely, including the adhesive strips.

∙ Before it is connected to the mains, the unit must be

thoroughly checked for transport damage, including its

power cord.

∙ Clean the unit as described in the section De-frosting and

cleaning.

∙ Once the unit has been positioned, wait for about 30

minutes before it is connected to the mains.

∙ If the unit has been tilted more than 30° during transport,

allow it to stand upright for at least 4 hours before it is

connected to the mains.

∙ When the unit is ﬁ rst switched on, a slight ‘new’ smell

may be noticed. However, this will disappear once the

cooling process has begun.

Installation

∙ The appliance should be set up in a well-ventilated, dry

room.

∙ It should be operated in conditions where the relative

humidity is no more than 70 %.

∙ The product data sheet contains details of the ambient

temperature range suitable for this appliance.

∙ Do not use the appliance outdoors. Ensure that the plug

is accessible and can be removed from the wall socket at

any time.

∙ Do not expose the appliance to direct sunlight, and

do not position it next to any heat sources (radiators,

cookers etc). If this cannot be avoided, however, suitable

insulation must be in installed between the heat source

and the unit.

∙ The unit must not be installed inside a cupboard; when

positioning the unit, also ensure that it is not placed

directly underneath a shelf or any other similar object.

∙ Ensure that there is sufﬁ cient space in front for the door

to open to 160°.

∙ In the case of uneven ﬂ oors, the adjustable feet at the

front can be used to compensate and ensure optimum

stability.

Ventilation

Ensure that there is enough space around the unit so that

the air circulation round and behind it is not obstructed.

(Rear 7.5 cm, sides and top 10 cm)

Reversible door

The design provides for the door to be reversed, i.e. for

right-hinged (default installation) to become left-hinged.

Warning: Always disconnect the unit from the mains before

any maintenance or repair work is carried out.

1. Remove the two screws at the rear, and then the entire

top panel. Caution: The metal plate edges on the rear

corners are very sharp.

2. Remove the four threaded bolts on the top and then

take off the hinge plate.

3. Carefully lift up the door and place it on a suitable

surface to protect it from scratches.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9816 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KS 9816 Manual

Product: