712709
11
Zoom out
Zoom in
Previous page
1/104
Next page
Dear Customer,
Before using the appliance, the user should read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to an earthed socket installed in accordance with
the regulations. Make sure that the supply voltage corresponds with the voltage marked on
the rating label. This product complies with all binding CE labelling directives.
Do not operate this unit by means of a transformer or, together with other electrical
appliances, by means of an extension cable.
To prevent noise vibration, ensure that the power cord does not touch any part of the
rear of the unit (e.g. the heat-exchanger).
General information
This appliance is a compressor refrigerator, designed for short-term storage of food in the
main cabinet or in the freezer compartment.
The unit is classed as Climate Class ‘N’ (Normal) and designed for domestic use. It complies
with all relevant norms for domestic refrigeration appliances.
Important safety instructions
To prevent the risk of personal injury or damage to the unit, it must only be transported
while in its original packaging. For unpacking and installation, 2 persons are needed.
The cooling circuit in this appliance contains the refrigerant isobutane
(R600a), a natural gas with a high level of environmental
compatibility, which is nevertheless flammable. Ensure, therefore,
that none of the components of the refrigerant circuit become
damaged during transportation and installation of the appliance. If
damage to the cooling circuit does occur, do not switch on or connect
the appliance to the mains power. In the case that there is an open fire or any other
sources of ignition in the vicinity of the refrigerant gas, make sure it is removed
immediately from this area and that the room is then thoroughly ventilated.
Warning: Do not damage the cooling circuit. Any escaping refrigerant causes damage to
the eyes; there is also a danger of the gas igniting.
Warning: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction. Sufficient ventilation must be ensured at all times.
Warning: Do not use any external device (e.g.; heaters or heating fans) to accelerate de-
frosting; follow only the methods recommended in this manual.
Warning: Do not operate any electrical appliances (e.g. ice makers) inside the freezer’s
food storage compartment.
Before it is connected to the mains power, the unit must be thoroughly checked for
transport damage, including its power cord.
The power cord should be regularly examined for any signs of damage. In the event of
such damage being found, the appliance must no longer be used.
To avoid the risk of fire, do not place any thermo-electric appliances on top of the unit.
Do not operate electric water kettles on top of the unit, in order to avoid liquid boiling
11
Refrigerator
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KS 9814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9814 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info