603088
12
Zoom out
Zoom in
Previous page
1/108
Next page
12
Cabinet freezer
Dear Customer,
Before using the appliance, please read the following
instructions carefully and keep this manual for future reference.
The appliance must only be used by persons familiar with these
instructions.
Transporting the appliance
To prevent damage to the unit during transport, ensure that
all accessories and components inside and around the
appliance are securely fastened.
The unit must only be transported in its vertical position; do
not tilt any more than 30°. For positioning, we recommend
that you tilt the unit slightly backwards. In this way, the
transport rollers can be used to move it to its intended place
of installation.
Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
If the unit has been tilted more than 30° during transport,
allow it to stand in an upright position for at least 4 hours
before it is connected to the mains.
Connection to the mains supply
The appliance should only be connected to an earthed
socket installed in accordance with the regulations. Make
sure that the supply voltage corresponds with the voltage
marked on the rating label.
This product complies with all binding CE labelling
directives.
Do not operate this unit by means of a transformer.
To prevent noise vibration, ensure that the power cord does
not touch any part of the rear of the unit.
Intended use
This compressor-freezer unit is designed
for deep-freezing and long-term storage
of deep-frozen food, as well as for making
ice-cubes.
Using it in any way other than the above is
not advised.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic or
similar applications, such as
- in staff kitchens in shops, of ces and
similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar accommodation,
- in bed-and breakfast type environments.
This appliance is not intended for
commercial use, nor for use in the catering
business or similar wholesale environments.
Important safety instructions
The cooling circuit
in this appliance
contains the refrigerant
isobutane (R600a), a
natural gas with a high
level of environmental
compatibility, which is nevertheless
ammable. Ensure, therefore, that none
of the components of the refrigerant circuit
become damaged during transportation and
installation of the appliance. If damage to the
cooling circuit does occur, do not switch on
or connect the appliance to the mains power.
In the case that there is an open re or any
other sources of ignition in the vicinity of
the refrigerant gas, make sure it is removed
immediately from this area and that the room
is then thoroughly ventilated.
Warning: Keep ventilation openings, in
the appliance enclosure or in the built-in
structure, clear of obstruction. Suf cient
ventilation must be ensured at all times.
Warning: Do not damage the cooling
circuit. Any escaping refrigerant causes
damage to the eyes; there is also a danger
of the gas igniting.
Warning: Do n ot use any external device
(e.g.; heaters or heating fans) to accelerate
de-frosting; follow only the methods
recommended in this manual.
Warning: Do not operate any electrical
appliances (e.g. ice makers) inside the
storage compartment that are not speci cally
permitted in these instructions.
GB
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KS 9811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9811 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info