712690

Severin KS 9772 Manual

18
Zoom out
Zoom in
Previous page
1/28
Next page
– The packaging materials must be properly disposed of.
– NOTE: When the door to the freezer unit is opened, a small red component will fall out; this is
for transport only and can be disposed of.
– Fit the two enclosed spacer elements (1) into the corresponding
guide slots (2) on the rear.
– Before it is connected to the mains, the unit must be thoroughly
checked for transport damage, including its power cord.
– Clean the unit as described in the section De-frosting and cleaning.
– For positioning, we recommend that you tilt the unit slightly
backwards. In this way, the transport rollers can be used to move it to its intended place of
installation.
– The unit should only be transported in its vertical position; do not tilt any more than 30°.
– Once the unit has been positioned, wait for about 30 minutes before it is connected to the mains.
– If the unit has been tilted more than 30° during transport, allow it to stand upright for at least 4
hours before it is connected to the mains.
– When the unit is first switched on, a slight 'new' smell may be noticed. However, this will
disappear once the cooling process has begun.
Installation
The appliance should be set up in a well-ventilated, dry room.
It should be operated in conditions where the relative humidity is no more than 70 %.
The product data sheet at the end of this manual contains details of the ambient temperature
range suitable for this appliance.
Do not use the appliance outdoors.
Ensure that the plug is accessible and can be removed from the wall socket at any time.
Do not expose the appliance to direct sunlight, and do not position it next to any heat sources
(radiators, cookers etc). If this cannot be avoided, however, suitable insulation must be in installed
between the heat source and the unit.
The unit must not be installed inside a cabinet, nor directly below a hanging cupboard, shelf or
similar object.
In the case of uneven floors, the adjustable feet on the unit can be used to compensate and ensure
optimum stability.
Set-up dimensions Ventilation
18
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KS 9772 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9772 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info