712675
12
Zoom out
Zoom in
Previous page
1/84
Next page
12
may heat up. There is therefore a
danger of burns.
Caution: Food containing fat or oil may
catch re when over-heated.
Do not attempt to move the unit while
there is cookware on the ceramic surface.
Do not pull or slide cookware over the
control panel, and do not place any
cookware on it.
Always remove the plug from the wall
socket
- after use,
- in case of any malfunction, and also
- before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not let the power cord hang free.
The power cord must be kept well away
from any hot part of the appliance.
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
This appliance is intended for domestic or
similar applications, such as
- in shops, of ces and other similar
working environments,
- in agricultural areas,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Start up
Before using the appliance for the rst time,
remove any remaining packaging and wipe
the surface with a damp cloth.
Suitable cookware
This appliance must only be used with
cookware suitable for use with induction-
type hot-plates, eg stainless-steel with
a ferro-magnetic base, or cast-iron or
enamelled steel cookware.
Cookware can be tested for its suitability
by simply holding a magnet to the base;
if the magnet is attracted, the cookware is
suitable for use with this appliance.
Only at-bottom pots and pans may be
used.
Do not use any cookware with a base less
than 2 mm thick.
Only pots and pans with a diameter of 12
to around 24 cm may be used.
If unsuitable cookware is used, the
appliance will respond with an error
message (see ‘Troubleshooting’ table).
Coated pots and pans may be damaged
by excessive heat. It is therefore
important to select the appropriate
temperature level for the cookware in use,
and to follow the information provided by
the cookware’s manufacturer.
A maximum load of 6 kg for each plate
must not be exceeded.
Setting the power output / temperature
This appliance may be operated by
either of its control features, ‘Power’
or ‘Temperature’ . For heating water,
steaming and similar cooking applications,
we recommend using the ‘Power’ control.
For frying, deep-frying and the like, the
‘Temperature’ control should be used.
Power
Press the operating key . The display
shows the default setting, 5. Using the + and
– selection keys, the power setting can be
adjusted from 1 to 10 as required (in model
DK1030: left plate 1-10 / right plate 1-7).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KP 1030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KP 1030 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info