Manual Severin KM 3923 (page 14 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712668

Zoom out

Zoom in

1/78

Spiral attachment

∙ Caution: Please take careful note of the diagrams at the

beginning of the manual before operating the appliance.

∙ Clean the food and cut it into pieces no longer than 15

cm.

∙ Tip: Always cut the food in such a way that

there is a ﬂ at surface to attach to the food

holder on the spiral attachment pestle.

∙ Fit the collection container into the appliance.

∙ Fit the gear-wheel insert into the housing.

∙ Select the desired blade insert and ﬁ t it into the gear-

wheel insert.

∙ Fit the spiral attachment and turn clockwise until it is

heard locking into place ( ).

∙ Take a prepared food item and attach its ﬂ at surface to

the end of the pestle (diagrams I & II).

∙ Insert the pestle with the food into the feeder chute.

Always hold the food ﬁ rmly in place until it actually

touches the blade insert (diagram III).

∙ Turn the appliance on and guide the pestle slowly

downwards, without applying much pressure (diagram

IV).

∙ Tip: Should a piece of food become separated

from the pestle, switch the appliance off and

disconnect it from the mains. Then take off the

spiral attachment, remove the detached food and

re-attach it to the pestle.

∙ The processed food is collected inside the container.

∙ Take out the pestle and attach a new piece of food, if

desired.

∙ For technical reasons, a small piece if food will remain on

the pestle. Remove this and use it another time.

∙ Tip: For best results the blade insert should be

cleaned between cycles, but at least each time the

appliance is switched off.

∙ Switch the appliance off and disconnect it from the mains.

Cutting attachment

∙ Clean the food.

∙ Fit the collection container into the appliance.

∙ Fit the gear-wheel insert into the housing.

∙ Select one of the blade inserts - and ﬁ t it into the

gear-wheel insert.

∙ Fit the cutting attachment so that the feeder tube points

towards the front, and secure it by turning clockwise (

)

until it is heard locking into place.

∙ Put one or more of the prepared food items into the

feeder tube. The tube can be ﬁ lled completely.

∙ Turn the appliance on and guide the cutting attachment

pestle slowly downwards, without applying much

pressure. Make sure that the ridge on the pestle ﬁ ts into

the guide groove in the feeder tube.

∙ The processed food is collected inside the container.

∙ Take out the pestle and, if required, put in more food.

∙ Switch the appliance off and disconnect it from the mains.

∙ Tip: For best results the blade insert should be

cleaned between cycles, but at least each time the

appliance is switched off.

After use

∙ The appliance should be thoroughly cleaned after each

use (see Cleaning and care).

∙ Empty the container.

∙ Take out the pestle.

∙ Remove the attachment by turning anti-clockwise ( ).

∙ Remove the blade and gear-wheel inserts.

Recipes

In the mood for some healthy recipe ideas?

or try www.severin.com/service/recipes

Cleaning and care

∙ Always disconnect the appliance from the mains before

cleaning.

∙ Do not use abrasives, harsh cleaning solutions or hard

brushes for cleaning.

∙ To avoid the risk of electric shock, do not clean the

housing with liquids and do not immerse it.

∙ The housing may be wiped with a slightly damp, lint-free

cloth.

∙ All detachable parts (see After use) may be cleaned

using hot water and a mild detergent, or in a dishwasher.

∙ Caution: The blades are very sharp. Always use the

cleaning brush provided.

Disposal

Devices marked with this symbol must be

disposed of separately from your household

waste, as they contain valuable materials which

can be recycled. Proper disposal protects the

environment and human health. Your local authority or

retailer can provide information on the matter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KM 3923 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KM 3923 Manual

Product: