761722
9
Zoom out
Zoom in
Previous page
1/58
Next page
9
142 x 208 mm
Multifunctional food processor
Dear Customer,
Before using the appliance, please read the following
instructions carefully and keep this manual for future
reference. The appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
Make sure that the supply voltage corresponds with the
voltage marked on the rating label of the appliance. This
product complies with all binding CE labelling directives.
Appliance Parts and Accessories
1. Grinding attachment container
2. Grinding attachment base
3. Mixing jug lid insert
(also for loosening blade unit)
4. Mixing jug lid
5. Mixing jug
6. Mixing jug blade unit
7. Nameplate (appliance underside)
8. Power cord with plug
9. Motor unit with rotary switch
10. Drive
11. Scraper
12. Working container
13. Drive shaft
14. Reversible working discs (P, F, R)
15. Emulsifying disc
16. Kneading tool
17. Chopping tool
18. Working container lid
19. Feed tube food pusher
Safety instructions
In order to avoid hazards and to
comply with safety regulations, any
repairs to the appliance and the power
cord must only be carried out by our
customer service. Therefore, in the
event of a repair being needed, please
contact our customer service by phone
or email (see Annex).
Disconnect the appliance from power,
- before any assembly or disassembly,
- before any opening of the lid,
- if supervision is not available,
- after every use,
- in the event of problems during
operation,
- before cleaning, every time.
Do not take the power plug out of the
socket by pulling on the power cord,
but hold the power plug to take it out.
Operating times and settings for the
individual accessories are provided
in the table at the beginning of the
manual.
Warning! Using the appliance
incorrectly can lead to injuries.
Warning! Only use the appliance
with the lid or protection in the correct
position for use, as described in the
manual. Because of the two safety
switches, the appliance can only be
switched on when the appropriate
accessories are attached and correctly
locked in place.
The chopping tool blades and discs
are sharp! Risk of injury! Particular
care must be taken when emptying the
working container and during cleaning.
For reasons of electrical safety, the
motor unit must never come into
contact with liquids or be immersed in
them.
Immediately after use, clean the
removable parts with water and dry
them thoroughly.
The removable accessories, but not
the blade unit of the blender container
and the scraper, can be cleaned in the
dishwasher.
For more information on cleaning,
please refer to the Cleaning and Care
section.
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KM 3892 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KM 3892 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info