712661
13
Zoom out
Zoom in
Previous page
1/76
Next page
13
the appliance has been switched off
and disconnected from the mains.
Caution: After switching off, always
wait until the motor has come to a
complete standstill. Do not touch any
moving parts.
Press the release button (PUSH) to
release the drive head. Tilt the head
upwards until it is heard locking safely
into place.
Fit the main bowl and lock it by turning it
clockwise.
Place the splash-guard ring onto the bowl
with the ller opening to the left.
When tting the attachments, ensure that
the pin on the mounting ts safely into the
corresponding recess in the attachment.
Push the attachment all the way up, then
lock it by turning it anti-clockwise (about
90°).
Caution: If an attachment should touch
the splash-guard ring when being tted,
lower the tilt-arm again and switch the unit
brie y on; this will bring the drive head in a
centred position inside the bowl.
Put the ingredients into the bowl.
Press the release button. Tilt the head
downwards until it is heard locking into
place.
Insert the plug into a wall outlet.
Slowly turn the rotary control to the
required speed setting.
The ller opening in the splash-guard
ring allows you to add further ingredients
during the stirring or kneading process.
Switch the appliance off and remove the
plug from the wall outlet after use,
Press the release button (PUSH) to
release the drive head. Tilt the head
upwards until it is heard locking safely into
place.
Caution: Check the position of the
attachments before tilting up the drive
head: if they are not in a centred position,
brie y switch the unit on again to centre
the drive head inside the bowl.
Push the attachment upwards all the
way, then unlock it by turning it clockwise
(about 90°) and remove it from its
mounting.
Remove the splash-guard ring.
Unlock the bowl by turning it anti-
clockwise and remove it.
Using the blender
Caution: When using the blender
attachment, both the main bowl and
splash-guard ring must be tted. Do not
reach into the stirring bowl with your
hands or ngers
Appropriate speed levels
Settings 1 to 4 are suitable for slow
blending and stirring.
Settings 5-6 are suitable for chopping,
mixing and pureeing.
Blender operation
Fit the blender jug in such a way that the
arrow mark on the jug is properly aligned
with the open-lock symbol (
). Lock the
jug by turning it clockwise, so that the
arrow mark on the jug is aligned with the
closed-lock symbol ( ).
Put the liquid ingredients into the blender
jug, which has a maximum capacity of
around 1,500 ml. To prevent possible
spillage when processing foamable or thin
liquids such as milk, do not ll the jug over
the 1,000 ml mark.
Place the lid on the jug so that the pouring
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KM 3890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KM 3890 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info