761723
13
Zoom out
Zoom in
Previous page
1/76
Next page
104 x 142 mm
13
Place the cutting&shredding attachment
onto the bowl and turn clockwise to lock.
The dispenser chute is on the left side of
the appliance.
Place a suitable container under the
dispenser chute.
Insert the plug into the wall outlet and
use the rotary control to select the
required power setting.
Load the food into the feeder chute
and insert the pestle. Guide the pestle
slowly downwards, without applying rm
pressure. Do not put your ngers into
the chute.
The processed food is collected inside
the container.
Remove the pestle and, if required, add
more food.
After use, turn the appliance off and
disconnect it from the mains.
Unlock and take off the individual
components.
Herbs, onions, meat, etc. must be
chopped
See g. II.
Place the bowl onto the drive unit and
turn clockwise to lock, so that the two
triangular symbols are aligned.
Fit the smaller blade unit on the larger
one and turn anti-clockwise ( ),
until it is heard locking into place.
Fit the cutting blade unit onto the drive
shaft.
Chop the food roughly and load it,
observing the ‘Max’ ll level.
CAUTION: The blades are very sharp.
When handling the blades, always hold
them by their upper protective plastic
covering.
Place the lid on the processing bowl and
turn it clockwise until it locks into place.
Insert the plug into the wall outlet and
use the rotary control to select the
required power setting.; process the
food until it has reached the required
consistency.
Hint: Chopping food usually takes
only a few seconds. We recommend
setting the rotary control to P and
processing the food in brief bursts.
After processing, always switch off
and remove the plug from the wall
socket rst before removing the lid.
Carefully remove the blade unit and the
processed food, then unlock and detach
the bowl.
When processing further food after the
rst cycle, make sure that the drive shaft
at the bottom of the bowl is free of food
residue before retting the blade unit.
Emulsifying / blending - Cream, egg
white, mayonnaise
See g. III.
Place the bowl onto the drive unit and
turn clockwise to lock, so that the two
triangular symbols are aligned.
Fit the emulsifying disk onto the drive
shaft.
Put the ingredients into the bowl.
Fill quantities:
Cream: max. 170 ml
Egg white: max. 3 eggs
Mayonnaise: up to the Max marking
Place the lid on the processing bowl and
turn it clockwise until it locks into place.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KM 3865 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KM 3865 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info