Manual Severin KGK 8913 (page 27 of 60) (English, German, Dutch, French)

761638

Zoom out

Zoom in

1/60

- 27 -

Step 4

Install the refrigerator and freezer doors on the

opposite side.

a) Remove the adjustable stand in the front,

as shown below. Then, install the lower

hinge on the other side of the fridge and

tighten the screws.

b) Install the shorter adjustable stand in the

front on the side, where the lower hinge is.

By turning the stand, you can adjust the

height on this side of the appliance until it

is levelled out.

Step 5

a) Attach the freezer door, turn the mid-

dle hinge 180° and then install it on the

opposite side of the appliance. Attach the

middle hinge with the 3 corresponding

screws.

b) Attach the refrigerator door and install the

upper hinge on the opposite side of the

appliance. Attach the upper hinge with the

4 corresponding screws. Attach the upper

hinge cover with a screw.

c) Install the gap cover on the opposite side

of the appliance and tighten the screw.

Finally, check for the right alignment of the

doors and that they close properly on all

sides. If necessary, adjust the stands in the

front for a fully horizontal positioning of the

appliance.

If you have tilted the appliance by more than

30°, please wait 4 hours before you connect

the appliance to the mains supply.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KGK 8913 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KGK 8913 Manual

Product: