Manual Severin KB 8874 (page 12 of 32) (English, German, Dutch, French)

748172

Zoom out

Zoom in

1/32

Main cabinet

∙ Different areas of the refrigerator

cabinet are affected differently by the

cooling effect. The warmest area is

around the door in the higher part of

the cabinet, the coldest around the

rear wall and in the lower part of the

cabinet.

∙ The food should therefore be stored

as follows:

∙ On main cabinet shelves (from top to

bottom): bakery items, ready meals,

dairy products, meat, sh and cold

meats/sausages.

∙ In the door (from top to bottom): butter,

cheese, eggs, tubes (eg mustard),

small bottles, large bottles, milk and

fruit-juice tetra-packs.

∙ To prevent the risk of personal injury or damage to the

unit, it must only be transported while in its original

packaging.

∙ Caution: Keep any packaging materials well away from

children: there is a risk of suffocation.

∙ The ice removed from the unit during de-frosting is not

suitable for human consumption.

∙ The power cord should be regularly examined for any

signs of damage. In the event of such damage being

found, the appliance must no longer be used.

∙ To avoid the risk of re, do not place any thermo-electric

appliances on top of the unit. Do not place liquid

containers on top of the unit, to prevent any leaking or

escaping liquid damaging the electrical insulation.

∙ This unit is designed for storing food only.

∙ Alcoholic substances may be stored only in properly

sealed containers and in upright positions.

∙ Do not store any glass bottles containing carbonated

or other freezable liquids in the unit: such bottles may

burst during the freezing process.

∙ To avoid the risk of food poisoning, do not consume food

after its storage time has expired. Thawed foods must

not be frozen a second time.

∙ Do not lean or put undue weight on the shelves,

compartments, door etc.

∙ Protect the inside of the refrigerator at all times from

open ames and any other sources of ignition.

∙ Remove the plug from the wall socket

- in case of any malfunction,

- before de-frosting,

- during cleaning,

- before maintenance or repair work is carried out.

∙ When removing the plug from the wall socket, never pull

on the power cord; always grip the plug itself.

∙ If the unit is not used for an extended period of time, we

recommend keeping the door open.

∙ We reserve the right to introduce technical modications.

Familiarisation

1. Cold storage compartment

2. Temperature control

3. Drip tray

4. General storage shelf

5. Adjustable feet

6. Door storage compartments

Before using for the rst time

∙ Remove any exterior and interior packaging materials

completely, including the adhesive strips.

∙ Please ensure proper disposal of all packaging

materials.

∙ Before it is connected to the mains, the unit must be

thoroughly checked for transport damage, including its

power cord.

∙ Clean the unit as described in the section De-frosting

and cleaning.

∙ The unit should only be transported in its vertical

position; do not tilt any more than 30°.

∙ Once the unit has been positioned, wait for about 30

minutes before it is connected to the mains.

∙ If the unit has been tilted more than 30° during transport,

allow it to stand upright for at least 4 hours before it is

connected to the mains.

∙ When the unit is rst switched on, a slight ‘new’ smell

may be noticed. However, this will disappear once the

cooling process has begun.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KB 8874 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KB 8874 Manual

Product: