544447
14
Zoom out
Zoom in
Previous page
1/88
Next page
14
turning the rotary control to its neutral
position ( ).
This cleaning procedure should also be
followed if the appliance has not been
used for an extended period of time.
Operation
General
Espresso is a strong coffee with its typical
froth, the ‘crema’, made from dark-roasted
coffee beans. Especially nely ground coffee
is necessary to make espresso.
Preheating the cups and the lter
holder
We recommend pre-heating the cups
and the lter holder, as this will ensure a
higher coffee temperature.
Insert the appropriate lter sieve for the
amount of espresso required into the
lter holder and push it rmly down until
it is heard locking into place.
Fit the lter holder to the appliance and
place a cup underneath it.
As soon as the operating temperature
has been reached, the temperature
indicator light comes on.
Turn the rotary control to the
symbol.
When the cup is about three quarters
full, turn the rotary control to its neutral
position to switch off the pump.
Put the cup aside to warm up; pour out
the water just before making espresso.
Filling the lter sieve with ground
espresso coffee / removing the
espresso grounds
Filling with ground espresso coffee
Remove the preheated lter holder
(Caution: the lter holder will be very
hot). Pour out any residual water.
Fill with nely ground espresso coffee:
single espresso = 1 level measuring
scoop
double espresso = 2 level measuring
scoops
Note: if the lter holder is over- lled, it
will not lock properly under the boiler
outlet. Do not put in more than the
quantity indicated above.
Use the measuring scoop to distribute
the ground espresso coffee evenly and
press it down lightly. Any excess coffee
powder on the rim of the lter holder
must be removed.
Removing the used grounds
After the brewing cycle is complete,
wait approximately 30 seconds until the
operating pressure has been suf ciently
reduced.
Exercise caution when removing the
lter holder: it may still contain some hot
water. Pour out the water carefully.
Allow the lter holder to cool down
suf ciently before tapping its side against
a vertical surface to loosen the grounds
before emptying it.
The cut-outs on the lter holder facilitate
removing the lter sieve; use the ngers
to pull the sieve out from above. Clean
the lter holder and sieve thoroughly.
Filter sieve - inserting and removing
espresso pads
Inserting the espresso pad:
Remove the pre-heated lter holder
with the lter sieve (Caution: the lter
holder will be very hot). Pour out any
residual water.
Insert an espresso pad into lter sieve
‘c’ (pad sieve). Ensure that the paper
rim of the ESE pad does not protrude
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 5991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 5991 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info