712354
12
Zoom out
Zoom in
Previous page
1/64
Next page
12
142 x 208 mm
Stand-by-mode & switching off
If the brewing cycle has been interrupted, the appliance
can be returned to standby mode, or switched off.
Turn the rotary control until only the main indicator light
remains lit. The unit is now in stand-by-mode.
The unit can be switched off by selecting and
pressing the rotary control .
Cable storage
The cable storage space serves for storing the cable.
The recess at the bottom facilitates limiting the length of the
power cord.
Cleaning and care
Before cleaning the appliance, ensure it is disconnected
from the power supply and has cooled down completely.
For safety reasons the coffee maker should not be
treated with water or liquids and should never be
immersed.
Do not use harsh abrasive cleaners.
After each use:
Clean the lter system and heat-retaining carafe:
To remove the coffee grounds, open the swing-out
lter, take off the lid and lift out the lter insert. Take out
the paper lter with the coffee grounds; as a natural
substance, the coffee grounds may be composted.
The drip-through lid, lter lid and lter insert may be
cleaned in hot soapy water, or in the dish-washer.
Do not dismantle the carafe, do not wash in a
dishwasher and do not immerse it in water.
Rinse the inside of the heat-retaining carafe with water
and wipe the outside with a clean damp cloth after use.
The individual parts should be thoroughly dried and then
re-tted to the unit.
If required:
Wipe the outer surfaces using a clean damp cloth; dry
thoroughly afterwards.
Wipe the inside of the reservoir with a clean damp cloth.
To prevent the outlet-valve of the water reservoir from
getting clogged, use a non-uffy cloth to clean the water
reservoir and the glass jug.
To remove any coffee deposits from the inside of the
heat-retaining carafe, ll it with hot water and add a
teaspoon of dishwasher detergent. Close with the
lid and leave it standing for some hours. Rinse out
thoroughly with water afterwards.
Descaling
Depending on the water quality (lime content) in your
area as well as the frequency of use, all thermal
household appliances using hot water need descaling
(i.e. removal of lime deposits) on a regular basis to
warrant proper functioning.
Any warranty claim will be null and void if the
appliance malfunctions because of insufcient
descaling.
The indicator starts ashing when the unit needs
descaling.
Descaling must not be done right away, but should be
done soonest.
Descaling may also be initiated any time prior to the
indicator ashing.
For descaling we recommend using a mixture of 6 cups
of water and 50 ml of vinegar essence.
Place a paper lter into the plastic lter (without using
ground coffee).
Fill the cold descaling solution into the water reservoir.
Turn the rotary control to and press it. The light ring,
the main indicator light and are lit.
Pour away the descaling solution once it has passed
through the system. Do not pour descalers down
enamel sinks. Do not use the descaling solution a
second time.
Once descaling has nished, the light ring starts
ashing.
To clean the machine after descaling operate it twice
or three times with fresh cold water only (without using
ground coffee). To start the process, select the symbol
and press the rotary control .
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 5761 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 5761 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info