647736
11
Zoom out
Zoom in
Previous page
1/72
Next page
11
Do not allow the appliance or its power
cord to touch hot surfaces or to come into
contact with any heat sources.
To prevent the danger of hot water or
steam being emitted, always switch off
the coffee maker and allow suf cient
time for the appliance to cool down
before it is opened or any accessories or
attachments are removed.
Remove the plug from the wall socket
- in case of any malfunction,
- during cleaning,
- after use.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not allow the power cord to hang free;
the cord must be kept well away from hot
parts of the appliance.
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Automatic switch-off
To save energy, the appliance will switch
itself off automatically around 35 minutes
after the brewing cycle has been completed.
Before using for the rst time
Before making coffee for the rst time,
let the appliance go through two or three
ltration cycles using the indicated maximum
amount of cold water, but without using
ground coffee. This should also be done
if the appliance has not been used for an
extended period of time, and after descaling.
General information
A measuring scale on the water container
and on the glass carafe facilitates lling
the container with the correct amount
of clean water. With a dual-scale, the
left scale is used for regular-sized cups
of approx.125 ml, while the right scale is
used for smaller cups. Make sure that the
indicated maximum amount of water is not
exceeded.
If several consecutive brewing cycles
are required, switch off the coffee maker
after each cycle and let the appliance cool
down for approx. 5 minutes.
Important note: When lling the
appliance with fresh water shortly after
a brewing cycle is completed, there is
a danger of scalding from hot water or
steam escaping through the water outlet.
Making coffee
Filling with water:
Open the water container lid and ll the
container with the desired quantity of water.
Close the water container lid.
Inserting the paper lter:
Open the swing-out lter sideways and insert
a size-4 paper lter into the lter holder, rst
folding down the perforated sides of the lter.
Filling with ground coffee:
For each regular-sized cup (125 ml), a
measure of about 7 g (= 1 measuring scoop
or 1½ - 2 teaspoons) of medium or nely
ground coffee will be required. Close the
swing-out lter afterwards.
Preparing the glass carafe:
Fit the lid onto the carafe, and then place
the carafe into the appliance. If correctly
inserted, the lid will disable the drip-stop
mechanism in the lter holder during the
brewing cycle.
Starting the brewing cycle:
Insert the plug into a suitable wall outlet and
use the On/Off button to turn the coffee
maker on. The ltration cycle starts and the
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4806 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info