712597
44
Zoom out
Zoom in
Previous page
1/72
Next page
Fino Multi KA4566
20
6. Fault nding and problem solving
The table provided below will help you to solve potential problems
occurring during operation. In the event that you cannot nd a suitable
solution for a problem, please contact our customer service department, see
section "Customer service" on the last pages of this instructions document.
Fault Cause Remedy
The appliance does not
operate after pressing the
Start/Stop button
.
Maybe the appliance is not connected to
a power supply.
Please check the connection line with
mains plug (K) for correct connection to
the mains supply.
The display element Error
/ storage settings
is
ashing.
No strainer support assembled. Insert the required strainer support (C
to E). Then, press the Start/Stop button
.
Bracket closure is open. Close the bracket closure (B). Then, press
the Start/Stop button
.
The water reservoir is empty or not
assembled or the water ll level is below
the mark MIN.
Please ll the water reservoir (L)
appropriately and assemble. Then, press
the Start/Stop button
.
The valve at the bottom of the water
reservoir is clogged.
Clean the water reservoir, see section
"5.
Cleaning, care and maintenance".
Unblock the valve by slightly pressing
against it from underneath.
Then, press the Start/Stop button
.
The oat used for ll level measurement
in the water reservoir is blocked.
Clean the water reservoir, see section
"5.
Cleaning, care and maintenance".
Unblock the oat by lightly shaking the
water reservoir.
Then, press the Start/Stop button
.
Water is dripping from the
brewing unit.
The bracket closure was not closed
properly.
Danger of scalding!
Immediately cancel the brewing process
by pressing the Start/Stop button
and wait until the display element
extinguishes. Carefully fold the bracket
closure (B) upwards, remove the strainer
support (C to E), check for faults/
irregularities and reassemble. Close the
brewing unit (A) by rmly pressing the
bracket closure (B) downwards.
The appliance performs
the brewing phase, but no
beverage is poured.
The strainer support is clogged. Clean the water strainer support,
see section "5.
Cleaning, care and
maintenance".
The water reservoirs was not assembled
properly.
Please check if the water reservoir (L) is
assembled properly.
The water reservoir was removed during
the brewing process.
Reassemble the water reservoir (L) and
continue or repeat brewing process.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4566 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4566 in the language / languages: German as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info