712596
34
Zoom out
Zoom in
Previous page
1/112
Next page
Fino Latte KA4565
34
5.2 Descaling
If the display element (H.1) ashes quickly during the preparation
process, the appliance requires descaling.
Commercially available products for descaling of coee makers are suitable
for this purpose. Prepare a batch of 900ml of the descaling liquid in
accordance with the instructions of the manufacturer of the descaling agent.
Important: Do not use vinegar or descaling agents on the basis of
acetic acid as there is a risk of damaging the appliance, e.g. at the
gaskets!
Please note: The safety information of the manufacturer of the
descaling agent must be observed. Do not pour the descaling agents
into enamelled sinks.
1. Fill the descaling liquid into the water reservoir (L) up to the mark MAX
(approx. 900ml).
2. Open brewing unit (A). For this purpose, fully fold the bracket closure (B)
upwards.
3. Remove the strainer support from the brewing unit.
4. Use a tall container with a capacity of minimum 900ml (e.g. a measuring
jug for 1l) and place it onto the drainage grille (G) without the drip tray
(F).
5. Press the Start/Stop button (H.3)
until the display element (H.2)
lights up. The descaling process is started and the display element
(H.1) starts ashing. The container is lled in intervals until the water
reservoir is empty. The appliance will stop between the individual
intervals (for approx. 30 seconds).
6. When the water reservoir is empty the display element (H.2)
starts
ashing. The rinsing process can be started. For this purpose, remove
the water reservoir (L), rinse it under running water and ll it up with
fresh, cold water up to the mark MAX (approx. 900ml). Empty the used
descaling liquid from the tall container and place the container back
onto the drainage grille. Now, press the Start/Stop button (H.3) . The
display element (H.2) lights up again and the appliance is rinsed with
cold water until the water reservoir is empty.
7. Now the appliance is descaled and ready for operation.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4565 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4565 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info